User Manual
www.scheppach.com / service@scheppach.com / +(49)-08223-4002-99 / +(49)-08223-4002-58
|
21
occur due to a failure to observe this manual and the
2. Device description
1. Overload switch
2.
3. Plunger
4.
5.
6.
7.
8. Parallel fence
8a. Locking screw
9. Planing blade cover
9a. Swivel arm for planing blade cover
10.
11.
12. Crank handle
13. Adjusting screw
14.
15.
16. Push stick
17. Push block
18.
19.
20. Anti-return claws
21. Planing table
22. Threaded spindle
23. Clamping screw
24. Cutter bar
25. Planing blade
26. Set screw
A.
C.
D.
E.
G. Scale (thickness plane)
Scale (infeed)
Scale (parallel stop)
3. Scope of delivery
• Operating manual
•
•
•
•
•
•
• Push stick
•
•
1. Introduction
Manufacturer:
scheppach
Dear customer,
-
Note:
manufacturer of this device is not liable for damages
which arise on or in connection with this device in
case of:
• improper handling,
• non-compliance with the instructions for use,
• -
ers,
• installation and replacement of non-original spare
parts,
• improper use,
•
-
lations
Recommendations:
-
These operating instructions are intended to make it
-
lize its intended possibilities of use.
The operating instructions contain important notes
repair costs, reduce downtime, and increase the reli-
-
of the machine.
Put the operating instructions in a clear plastic fold-
them near the machine. The instructions must be
trained in the use of the machine and have been in-
formed on the related dangers and risks are allowed
to use the machine. The required minimum age must
be met.
-
ent operating instructions and the special regulations
rules for the operation of wood working machines
must be observed.