User Manual
www.scheppach.com / service@scheppach.com / +(49)-08223-4002-99 / +(49)-08223-4002-58
GB
|
35
15. Troubleshooting
Fault Possible cause Remedy
Motor does not work Motor, cable or plug defective, fuses burnt
specialist.
The motor starts up
reach operating speed.
Voltage too low, coils damaged, capacitor
burnt
Have an electrician check the voltage.
-
specialist
Motor makes exces-
sive noise
Coils damaged, motor defective -
ist
The engine does not
reach full power.
Circuits in the network are overloaded
(lamps, other motors, etc.)
same circuit
Motor overheats
-
ing of the motor
Avoid overloading the motor while cutting,
remove dust from the motor in order to ensure
optimal cooling of the motor
Saw cut is rough or
Saw blade dull, tooth shape not appropriate
for the material thickness
Re-sharpen saw blade and/or use suitable saw
blade
and/or splinters
Excessive cutting pressure and/or saw
blade not suitable for use
Insert suitable saw blade