User Manual
www.scheppach.com / service@scheppach.com / +(49)-08223-4002-99 / +(49)-08223-4002-58
GB
|
25
• Reaching into the running saw blade (cut injuries).
• Kick-back of workpieces and parts of workpieces.
• Saw blade fracturing.
•
• -
• Harmful emissions of wood dust when used in
closed rooms.
Please note that our equipment has not been de-
signed for use in commercial, trade or industrial appli-
is used in commercial, trade or industrial businesses
or for equivalent purposes.
5. Safety information
General power tool safety warnings
m WARNING! Read all safety warnings, instruc-
tions, illustrations and specications provided
with this power tool. Failure to follow all instructions
Save all warnings and instructions for future ref-
erence.
(cordless) power tool.
1. Work area safety
• Keep work area clean and well lit. Cluttered or
dark areas invite accidents.
• Do not operate power tools in explosive at-
mospheres, such as in the presence of am-
mable liquids, gases or dust. Power tools cre-
• Keep children and bystanders away while op-
erating a power tool.
to lose control.
2. Electrical safety
• Power tool plugs must match the outlet. Never
modify the plug in any way. Do not use any
adapter plugs with earthed (grounded) power
tools.
reduce risk of electric shock.
• Avoid body contact with earthed or ground-
ed surfaces, such as pipes, radiators, ranges
and refrigerators. There is an increased risk of
• Do not expose power tools to rain or wet con-
ditions. Water entering a power tool will increase
the risk of electric shock.
A.) 90° stop angle (not supplied)
B.) 45° stop angle (not supplied)
C.)
D.)
E.) Phillips head screw (Laser)
3. Scope of delivery
• Crosscut, drag and mitre saw
• 2 x Clamping device (7)
• 2 x Workpiece support (8) (preassembled)
• Sawdust bag (17)
•
•
• Operating manual
4. Intended use
The crosscut, drag and mitre saw is designed to
crosscut wood and plastic respective of the machine’s
Warning!
Do not use the saw to cut materials other than those
Warning!
-
ing of wood! Do not use this blade for the sawing of
misuse. The user / operator and not the manufacturer
caused as a result of this.
-
the operating instructions to be found in this manual.
All persons who use and service the equipment have
to be acquainted with this manual and must be in-
formed about the equipment’s potential hazards.
It is also imperative to observe the accident preven-
The same applies for the general rules of health and
from such changes.
Even when the equipment is used as prescribed it is
still impossible to eliminate certain residual risk fac-
with the machine’s construction and design:
• Contact with the saw blade in the uncovered saw
zone.