User's Manual

ChipCoin
®
Processing
Car Park Management System PMS20
Manual ChipCoin Processing
2.4.2. Inside
2.4.2.1. Cover removal
For removal of the cover the coin feeder should be taken out of its bracket.
Coin channel and cover are held together by a bayonet catch. After pushing the
cover upwards it can be removed.
Push cover upwards Coin feeder without the cover
Article no. of chapter: 86 93538 (d) 7
© 2004 by Scheidt & Bachmann GmbH, Mönchengladbach (Germany) All rights reserverd. Subject to alterations. Some Illustrations and descriptions may also include special options.
i
i
c c c
c c c
d
e
c
c
c
c
c
c
c
c
c
i
i
f
g
h
c
c c c
c
i
c c c
c
c
i
c Condensation openings
d Reflecting sticker for reflect coupler
i Bayonet catch
e Reflex coupler
f Stopper magnet (exit, automatic
pay station)
g Stopper magnet (entry)
h Rejector plate
• Check the sticker (d) for dirt. It must have a light-coloured reflecting surface.
• Check the reflex coupler (e) for dirt.
• For cleaning the coin channel use an air pump, a brush or a soft rag.
• Check to see that the stopper magnets (f,g) work smoothly. They must let
themselves be pressed in easily upon pressure from the encapsulated spiral
spring. Under no circumstances may they be hard to move, nor should they stick
tight.