User's Manual

ChipCoin

Processing

Car Park Management System PMS20

Manual ChipCoin Processing

2.3. Automatic Pay Station

Article no. of chapter: 86 93538 (d) 5

All rights reserverd. Subject to alterations. Some Illustrations and descriptions may also include special options.

Shutter flap

Shutter magnet

Read/write antenna

Reflex coupler circuit board

Stopper magnet for

read/write operation

Coin channel

(covered by mounting plate)

Mounting plate

2.3.1. Function

At the automatic teller the shutter closes upon insertion of a ChipCoin and thereby

prevents the customer from inserting coins into the coin feeder.

In standard condition the shutter is opened and the stopper magnet blocks the

ChipCoin.

If the customer has inserted the ChipCoin for analysis, this is recognised by the

reflex coupler and the shutter is closed (the magnet drops down). The ChipCoin is

positioned in front of the read/write antenna by the stopper magnet. The amount to

be paid is determined and displayed.

When the payment operation is completed, the authorisation to exit is coded on the

ChipCoin and the stopper magnet is briefly pulled tight. The ChipCoin falls into the

return change cup for removal.

Suggestion:

In order to avoid blockage/disturbance by foreign matter (e g, coins), the stopper

magnet at regular intervals pulls tight briefly so that such items are diverted down

into the return change cup.