User's Manual

ChipCoin

Processing

Car Park Management System PMS20

ChipCoin Processing Manual

2.2. Exit

4 Article no. of chapter: 86 93538 (d)

All rights reserverd. Subject to alterations. Some Illustrations and descriptions may also include special options.

Shutter flap

Shutter magnet

Reflex coupler circuit board

Mounting plate

Coin channel

(covered by mounting plate)

Read/write antenna

Stopper magnet for

read/write operation

Reject plate for invalid ChipCoins

Reject magnet for invalid ChipCoins

2.2.1. Function

The shutter releases the ChipCoin insert chute if a vehicle is on the loop. In this

way insertion of foreign matter by pedestrians (vandalism) is prevented.

In standard position the shutter is closed, the stopper magnet blocks the ChipCoin

and the rejector plate stands in the "Reject coin" position (output to the front).

If the loop is driven over, the shutter is opened. (Magnet pulls tight). The ChipCoin

is inserted and is blocked at the read/write antenna by the stopper magnet. The

ChipCoin is analysed.

If it entitles the holder to exit, the stopper magnet and the reject magnet pull tight.

The ChipCoin falls into the exit collector receptacle and the gate is opened.

If the ChipCoin is invalid (eg, the period of grace is exceeded; supplemental

payment) the stopper magnet pulls tight and the ChipCoin is outputted to the front

via the reject plate. The gate does not open. The reason for this is shown to the

customer on the display.