Integration Guide

6 of 6

O5K-SCR2_Integration_Guide - 000104.doc

(2) this device must accept any interference received, including interference that

may cause undesired operation.

- The integrator must test the final product to comply with FCC regulations regarding

unintentional radiators (FCC section 15.107 and 15.109) before declaring FCC

compliance of his own product.

ATTENTION:

Changes or modifications not expressly approved by Scheidt & Bachmann GmbH could

void the user’s authority to operate the equipment.

5.2 IC (Canada)

Labeling requirements for Industry Canada (IC) are similar to those of the FCC. A clearly

visible label on the outside of the final product must display at least the following text:

Contains Model QR15 RFID Module, IC: 8312A-SCR2

The integrator is responsible for its product to comply with IC ICES-003 & FCC Part 15, Sub.

B - Unintentional Radiators. ICES-003 is the same as FCC Part 15 Sub. B and Industry

Canada accepts FCC test report or CISPR 22 test report for compliance with ICES-003.

6 Contact

Scheidt & Bachmann GmbH

Breite Str. 132

41238 Mönchengladbach

Germany

Tel.: +49 (0)2166 / 266 – 0