Integration guide for Scheidt & Bachmann Smartcard Reader 2.0 1 of 6 O5K-SCR2_Integration_Guide - 000104.
Table of contend Integration guide for Scheidt & Bachmann Smartcard Reader 2.0 __________________ 1 Revisions __________________________________________________________________ 2 1 The Module ___________________________________________________________ 3 1.1 Connections ................................................................................................................ 3 1.2 Interfaces ............................................................................................................
1 The Module Product Marketing Name: Smartcard Reader 2.0 HVIN: 03740300 FVIN: 07337130 FCC ID: O5K-SCR2 IC: 8312A-SCR2 1.1 Connections Pinning of the 52 pin PCIe Edge Connector (ST1) PIN Description Netlabel PIN Description Netlabel 1 Trace Clock (Trace Debug Port) Trace_CLK 27 Ground GND 2 3.
1.2 Interfaces The main communication Interface to the Host system is USB 2.0. Make sure that requirements made by the USB-Standard are considered. 1.3 Environmental conditions Temperature: • • Operating temperature: Storage temperature: -25 to +60°C -30 to +60°C Humidity: • 5% to 95% not condensing. The module is sensitive to ESD. Take care while handling these modules. 2 Power supply Supply voltage for digital circuits: 3.3V +/-5%. Make sure the voltage is accurate.
4 Compliance statements In the manual of the host product the following statements have to be written in a prominent location: NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
(2) this device must accept any interference received, including interference that may cause undesired operation. - The integrator must test the final product to comply with FCC regulations regarding unintentional radiators (FCC section 15.107 and 15.109) before declaring FCC compliance of his own product. ATTENTION: Changes or modifications not expressly approved by Scheidt & Bachmann GmbH could void the user’s authority to operate the equipment. 5.
