User's Manual

© 2015 Scheidt & Bachmann GmbH, Germany Subject to change
Component Description
11
PitBase TWN4, 86 93421 (a)
2.4 FCC Label
The FCC label on the PCB provides information on the approval number:
Fig. 7: PitBase TWN4 – FCC Label
FCC ID: O5K-PITBASETWN4 / IC: 8312A-PITBASETWN4
The device that contains the PitBase TWN4 must contain the following word-
ing in its user manual:
Contains FCC ID: O5K-PITBASETWN4
Contains IC: 8312A-PITBASETWN4
2.5 Technical Specifications
General technical data
Supported media:  HITAG-1 transponder (125 kHz)
 HITAG-S2048 transponder (125 kHz)
Connectors:  2 x antenna coil
 Power connection via 3.5mm jack connector
 RS232 interface
Operating voltage: 12 V DC ± 20 %
Current consumption: approx. 100 mA
Read/write antennas:  2 connectors
 Inductance: 490μH per connector
 approx. 3 cm read/write distance
Dimensions: approx. 165 mm x 87 mm x 20 mm
Weight: approx. 158 g
Temperature range: -25°C to +80°C
Relative humidity: ±0 % ... 95 % (non-condensing)