User Manual

n Systems for Car Parks and Leisure Centres
Manual ChipCoin Processing
Article no. of chapter: 86 93538 (c) 7
2.4.2 Inside
2.4.2.1 Cover removal
For removal of the cover the coin feeder should be taken out of its bracket.
Coin channel and cover are held together by a bayonet catch. After pushing the
cover upwards it can be removed.
Push cover upwards Coin feeder without the cover
• Condensation openings
‚ Reflecting sticker for reflect coupler
‡ Bayonet catch
ƒ Reflex coupler
„ Stopper magnet (exit,
automatic pay station)
… Stopper magnet (entry)
† Rejector plate
• Check the sticker (‚) for dirt. It must have a light-coloured reflecting surface.
• Check the reflex coupler (ƒ) for dirt.
• For cleaning the coin channel use an air pump, a brush or a soft rag.
• Check to see that the stopper magnets („,…) work smoothly. They must let
themselves be pressed in easily upon pressure from the encapsulated spiral
spring. Under no circumstances may they be hard to move, nor should they
stick tight.
‡
‡
‡
•
•
•
•
•
‡
• • • •
•
‡
‡
†
• • • • • •
•
•
•
• • •
„
•
•
…
ƒ ‚
•