User Manual

n Systems for Car Parks and Leisure Centres
ChipCoin Processing Manual
4 Article no. of chapter: 86 93538 (c)
2.2 Exit
2.2.1 Function
The shutter releases the ChipCoin insert chute if a vehicle is on the loop. In this
way insertion of foreign matter by pedestrians (vandalism) is prevented.
In standard position the shutter is closed, the stopper magnet blocks the ChipCoin
and the rejector plate stands in the "Reject coin" position (output to the front).
If the loop is driven over, the shutter is opened. (Magnet pulls tight). The
ChipCoin is inserted and is blocked at the read/write antenna by the stopper
magnet. The ChipCoin is analysed.
If it entitles the holder to exit, the stopper magnet and the reject magnet pull
tight. The ChipCoin falls into the exit collector receptacle and the gate is opened.
If the ChipCoin is invalid (eg, the period of grace is exceeded; supplemental
payment) the stopper magnet pulls tight and the ChipCoin is outputted to the
front via the reject plate. The gate does not open. The reason for this is shown to
the customer on the display.
Reject magnet for invalid ChipCoins
Shutter flap
Shutter magnet
Read/write antenna
Reflex coupler circuit board
Stopper magnet for
read/write operation
Reject plate for invalid ChipCoins
Coin channel
(covered by mounting plate)
Mounting plate