User Manual

n Systems for Car Parks and Leisure Centres
Manual ChipCoin Processing
Article no. of chapter: 86 93538 (c) 3
2 Coin feeder
2.1 Entry
2.1.1 Function
As soon as a vehicle drives over the loop, the ChipCoin, which has already been
positioned by the stopper magnet in front of the read/write antenna, is coded.
After pressing the ChipCoin request button the stopper magnet is pulled tight
and the ChipCoin is thereby released for output.
If the ChipCoin cannot be coded, the stopper magnet and the reject magnet pull
tight and the ChipCoin falls into the collector receptacle.
If the ChipCoin is not removed within a predefined period of time, the stopper
magnet pulls tight and the coin is dropped into the collector receptacle.
After removing the coded ChipCoin a new ChipCoin is brought into position in
front of the read/write antenna.
Reject magnet for ChipCoins
not removed
Read/write antenna
Stopper magnet for
read/write operation
Reject plate for ChipCoins
not removed
Mounting plate
Coin channel
(covered by mounting plate)