User Manual
Table Of Contents
- Chapter 1 Introduction
- Chapter 2 Declaration of Conformity
- Chapter 3 Safety Features
- Chapter 4 General Module Description
- Chapter 5 Commissioning
- Chapter 6 Explanation of terms
Chapter 5
Commissioning
Edit: Stevens Art.#.: 86 -----, Version 1.8 Date:15.06.2016
5-6
Figure 5-10: Loading Paper Step 6
5.5 Switch
On/Off
Turning on and off of the MT|60 is done via the centrally disposed on/off switch.
To turn on the MT|60, press the switch for 2-3 seconds.
To turn off the MT|60 press the on/off switch for a longer time.
However, the switching process needs to be confirmed by an additional display
dialog.
Figure 5-11: On/Off switch
5.6 First Start
In the delivery state or after resetting to factory settings, the MT|60 is equipped
with the standard components of the Android operating system and a demo
application to test the operation of the Barcode Imager, the smart card reader,
the magnetic stripe reader and the printer. For correct operation, the following
settings should be checked and adjusted on first use:
Regional Settings
Time and Time Zone