User Manual

Edit: Stevens Art.#.: 86 -----, Version 1.8 Date:15.06.2016
4-12
4.7.4 Battery Label
The MT 60 provided with a power supply "19V/max 3,3A". The output
voltage imply the feature of safety extra low voltage as a limited power
source. During connection to the ac/dc source the batteries recharge. It
need not more than 4 1/2h to recharge the battery to full condition.
Caution: use this power supply provided by Scheidt & Bachmann only.
Otherwise a damage or risk of fire may cause.
The MT60 provided with a removable battery type FareGo Move MT60
Battery cpl. 86 34471 0.
The Battery consisting of UL-recognized Li-cells and a battery
management system (BMS) are in compliance with UL2054. The safeties
are tested and recognized by an UL-Investigation and reported to BBFS2/
MH45433. Additional to the BMS an internal fuse ensure a "limited power
source" output voltage.
This battery comply to safety standards as follows: IEC60950-1, LPS,
UL2054, IEC62133, UN38.3.
Caution:
Replace battery with type MT60 - 86 34471 0 only! Otherwise it may cause
a Risk of Fire and Explosion.
Do Not Open, Crush, Heat Above +55C or incinerate.
Model
No.
Nominal
Voltage,
V dc
Capacity,
Ah/Wh
Maximum
Charging
Voltage,
V dc
Maximum
Charging
Current, A
Maximum
discharge
Current, A
Dis-charge
Cutoff
Voltage,
Vdc
Cell
Config
xS/yP Cell Mfg.
Cell
Model
Number
2S1P
NCR-
18650
BF
7.2
3.35Ah /
24.12Wh
8.4 1.6 4.8 5.0 2S-1P
Panason
ic
NCR-
18650B
F