User manual

Installation instructions for solar charge regulator LRM 1218
13
Date: 21.04.2015
822.213 MA / EN
5.4 Connectio n to an EBL ... electroblock with SDTBUS
For this application, the follow parts are required from those delivered:
Fig./Pos.
Qty Name
1 1 LRM 1218 solar charge regulator
1/1 or 2 1 20A or 15A flat vehicle fuse (depending on EBL ...)
2/2 1 EBL ... connector cable (batteries for charge currents)
2/4 1 SDTBUS connector cable
-- 2 Wire end sleeves (not included in delivery)
G3
+
--
--+
LRM 1218
3
TF 50 A*
Red
Black
Brown
White
Brown
EBL ...
on block
”Solar charge
EBL ... on block ”SDTBUS”
X
Y
1
2
3 2
3
1
regulator”
Fig. 7 Circuit diagram for LRM 1218 connection to EBLs with SDTBUS
Pos. Name
X Cable with electroblock connector:
-- X1 Brown Negative battery
-- X2 Red + Starter battery
-- X3 Black + Leisure area battery
Y SDTBUS to electroblock connector cable
G3 Solar module(s)
LRM 1218 Solar charge regulator
TF 50 A* Temperature sensor (special configuration, see also Section 5.5)