User manual

Installation instruction s for solar charge regulator LRM 1218
10
Date: 21.04.2015 822.213 MA / EN
5.3 Connection to an EBL ... electroblock with 3--pin MNL con-
nection and ad ap ter for starter b attery
When using an electroblock which only has a 3--pin connection for a solar
charge regulator, an adapter for charging the starter battery can be retrofit-
ted. It is then possible to charge the leisure area and starter batteries simul-
taneously.
The following electroblocks (as of April 2008) can be used with the adapter:
F EBL 99
F EBL 100
F EBL 264-9
F EBL 240
F EBL 269
An LT 320 operating and display panel, for the display of solar charge cur-
rents, can be used as an optional accessory.
For this application, the follow parts are required from those delivered:
Fig./Pos. Qty Name
1 1 LRM 1218 solar charge regulator
1/1 or 2 1 20A or 15A flat vehicle fuse (depending on EBL ...)
2/2 1 EBL ... connector cable (leisure area battery charge
current). Here the middle wire on the connector
must be detached and the red cable be pulled from
the insulating sleeve.
2/3 1 EBL ... connector cable (starter battery charge cur-
rents) is looped in between cable loom and EBL
-- 2 Wire end sleeves (not included in delivery)