User manual

pressing the number buttons. For example: press 10+ button once, 5 button once, you may

select the 15th band. Press the CH-

or CH+ button, the band will be switched up or down.

3) Automatically search bands: press the AUTO

button, this unit will start to search bands from the

lowest part to highest part automatically. Meanwhile the searched bands will be saved orderly.

Press STOP button to stop searching.

3. Soundtrack Selection

Press the MO/ST

button on the remote control, you may select Mono and Stereo soundtrack output

in FM status. If the signal is not strong enough, you cannot select Stereo.

4. Exit FM Status

Press the CD/FM

button on the remote control (or front panel) to exit FM status, and press

CD/USB switch to other modes.

Remark: FM Frequency range: 87.5-108 MHz

NOTE: 1. You may adjust the best radio effect by adjusting the antenna.

2. You can search further bands by pressing AUTO

button when adjusted the antenna in a right

position.

3. If the band is not clear by auto search, you choose the way manual search adjustment by

press SEEK-/SEEK+

button.

4. The channel number could not exceed 20

5. Cannot input the frequency number directly.

SPECIFICATION

Output ports L/R speaker output ports

Input ports USB In, Headphone Jack

Power supply 220-240V~ 50Hz

Max power 40W

Frequency 20Hz-20KHz ±3dB