Operation Manual

EN | 21
EN
Remove the screws from the main unit.
Attach the wall brackets to the main unit with
the screws removed from the main unit
Wall bracket
Drill 2 parallel holes (Ø 3-8 mm each according
to wall type) in the wall. The distance between
the holes should be 979 mm.
Leave a 5 mm gap between the wall and the screw’s head. Lift the unit with the attached wall brackets over
the heads of the screws and slot into place.
Firmly fix 1 dowel into each hole in the wall
if necessary.
Solid wall (i.e., Solid brick,
Solid concrete, Solid wood,
Solid wooden battens)
Drywall, Plaster wall,
Lath wall, etc.
5 mm
Wall
979 MM
Dowel
Screws
Connections
OPTICAL Socket
• Remove the protective cap of the OPTICAL socket, then connect an OPTICAL cable (not in-
cluded) to the TV’s OPTICAL OUT socket and the OPTICAL socket on the unit.
TV
OPTICAL cable
OPTICAL cable
Tip:
• If there is no sound coming out of the soundbar and the indicator light is ashing quickly, make
sure the audio setting of your source player (e. g. DVD player, game console, TV) is set to PCM
with optical input.
AUX Socket
A. Use an RCA to RCA audio cable (included) to connect the TV’s audio output sockets to the AUX
(R/L) socket on the unit.