Operation Manual

EN | 23

• Aim the remote control directly at the sensor on the front of the unit.

No response from the unit

• Disconnect and reconnect the AC power plug, then turn the unit on again.

I can’t nd the Bluetooth

name of this unit on my Bluetooth

device for pairing

• Ensure the Bluetooth

function is activated on your Bluetooth

device.

• Ensure you have paired the unit with your Bluetooth

device.

Technical Specications

Soundbar

Power Supply: ....................................... AC 220-240V~ 50/60Hz

Output Power (RMS): ............................ 2x 20W

Power Consumption (max.): .................. 45W

Total Harmonic Distortion: ..................... 1% (1kHz, 1W)

Audio Input Sensitivity: .......................... 700mV

Frequency Response: ........................... 40Hz - 20KHz

Impedance: ............................................ 8Ω

Dimensions (WxDxH): ........................... 806 x 60 x 62 mm

Remote Control

Distance:................................................ 6 m

Angle: .................................................... 30°

Technical specications and design may change without notice.

We, Karcher AG, herewith conrm that this product is in line with the basic requirements of regulation

1999/5/EG and further relevant regulations.

A copy of the declaration of conformity can be obtained at the following address:

Karcher AG | Gewerbestr. 19 | 75217 Birkenfeld

Or online at the following link:

http://www.karcher-products.de/index.php/Konformitaetserklaerungen.html

The Bluetooth

word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any

use of such marks by Karcher is under license. Other trademarks and trade names are those of their

respective owners.