Operation Manual
18 | EN
Placement and Mounting
Placement
A. If your TV is placed on a table, you can place the unit on the table directly in front of the TV stand,
centered with the TV screen.
B. If your TV is attached to a wall, you can mount the unit on the wall directly below the TV screen.
Option - A Option - B
Wall Mounting (if using Option B)
• Installation must be carried out by qualied personnel only. Incorrect assembly can result in
severe personal injury and property damage. Before mounting to a wall it must be checked
conrmed that there are no installations such as electrical wiring and plumbing inside this wall. It
is the installer’s responsibility to verify that the wall will safely support the total load of the unit and
wall brackets.
• Additional tools (not supplied) are required for the installation.
• Do not overtighten screws.
• Keep this instruction manual for future reference.
• Use an electronic stud nder to check the wall type before drilling and mounting.
Remove the screws from the main unit.
Attach the wall brackets to the main unit with
the screws removed from the main unit
Wall bracket
Drill 2 parallel holes (Ø 3-8 mm each according
to wall type) in the wall. The distance between
the holes should be 720 mm.
Leave a 5 mm gap between the wall and the screw’s head. Lift the unit with the attached wall brackets over
the heads of the screws and slot into place.
Firmly fix 1 dowel into each hole in the wall
if necessary.
Solid wall (i.e., Solid brick,
Solid concrete, Solid wood,
Solid wooden battens)
Drywall, Plaster wall,
Lath wall, etc.
5 mm
Wall
720 MM
Dowel
Screws