Operation Manual

EN | 17
EN
Remote Control
1.
Switch the unit between ON and STANDBY
mode.
2. SOURCE
To select the play function.
3. VOL+/VOL-
Increase/decrease the volume.
4. /
Skip to previous/next audio le in Bluetooth
®
mode.
5.
Start or pause playback in Bluetooth
®
mode.
6. BT PAIR
Activate the pairing function in Bluetooth
®
mode and disconnect the existing paired
Bluetooth
®
device.
7. MUTE
Mute or resume the sound.
8. EQ
Select a preset sound effect.








First Time Use
The unit has a pre-installed CR2025 battery. Remove the protective tab to acti-
vate the remote control battery.
Replacing the Remote Control Battery
1. Pull out the battery tray and remove the old
battery.
2. Place a new CR2025 battery into the battery
tray with correct polarity (+/-) as indicated.
3. Insert the battery tray back into the slot.
Notes:
• Even if the remote control is operated within the effective range (6m), remote control operation
may be impossible if there are any obstacles between the unit and the remote control.
• If the remote control is operated near other products which generate infrared rays, or if other
remote control devices using infrared rays are used near the unit, it may operate incorrectly.
Conversely, the other products may operate incorrectly.
• When the remote control is not used for a longer period of time, remove the battery to prevent it
from leaking.
• Mind the safety information for the use of batteries on page 14.