Operation Manual

EN
EN - 17
• Press the Y-M-D button (7) once again to display month and day. After 2 seconds the
display will switch back to the time.
Year
Month Day
Temperature Display
• To display the room temperature, press the °C-°F button (7) three times during clock
display. The temperature will be shown in the display.
• To switch between Celsius and Fahrenheit, press and hold for 2 seconds the C°-F° but-
ton (7) during temperature display.
• After 2 seconds the display will switch back to the time.
Daylight Savings Time
In case of daylight savings time it is not necessary to completey do over the clock setting:
• During clock display mode simply press and hold the DST button (5) for 2 seconds. 1
hour will be added to the time.
• To switch back to regular time, press and hold the DST button (5) once again for 2
seconds during clock display.
Dimmer
The display brightness can be adjusted in 3 levels (High - Medium - Low).
To adjust the display brightness press the DIMMER button (5) repeatedly during clock display
mode. Each press of the button changes the brightness.
Display Off
• To switch off the display, press and hold the DISPLAY AUTO OFF button (8) for 2
seconds during clock display mode. The standby indicator will light up. After about 15
seconds the display switches itself off.
• To temporarily display the time, press any button. After about 15 seconds the display will
switch off again.
• If you have an alarm set it will ring at the set time.
• To turn the display on again, rst press any button to show the time, and then press
and hold the DISPLAY AUTO OFF button (8) for 2 seconds until the standby indicator
disappears.
Display Auto Change
When this function is activated the display will consecutively show time, year, month and day,
and the room temperature.
• To activate the Display Auto Change function, press and hold the DISPLAY AUTO
CHANGE ON/OFF (7) for 2 seconds during clock display mode. The display will show