Operation Manual

16 - EN
the date correctly.
5. Press the respective ALARM button again. If you have selected “1 - 1” for intervall you
are now being asked to select the day on which the alarm should sound (1 = Monday, 2 =
Tuesday, 3 = Wednesday, 4= Thursday, 5 = Friday, 6 = Saturday, 7 = Sunday). Select the
desired day using the buttons ◄◄ (7) and ►► (8).
6. Press the respective ALARM button again. The alarm mode starts ashing. Select either
buzzer (“bu”) or radio using the buttons ◄◄ (7) and ►► (8).
When selecting radio, the last set frequency will ash.
7. Press the respective ALARM button again. If you selected buzzer (“bu”) as alarm mode
the setting is nished and the display will switch back to the clock display.
When you selected radio as alarm mode, the volume starts ashing. Select the desired
radio volume using the buttons ◄◄ (7) and ►► (8). When the alarm goes on the radio
volume will increase until it reaches the set volume.
8. Press the respective ALARM button again. The setting is nished and the display will
switch back to the clock display.
9. The ALARM indicator is lit indicating that the alarm is active.
Functions
Activating/Deactivating an Alarm
• To deactivate a previously set alarm, press and hold the respective ALARM button (1 or
2) during regular clock display for 2 seconds until the alarm indicator disappears. This
alarm is now deactivated and will not ring.
• To activate a previously set alarm, press and hold the respective ALARM button (1 or 2)
during regular clock display for 2 seconds until the alarm indicator appears in the display.
This alarm will now ring at the previously set time.
Alarm Duration and Stopping an Alarm
Once active the alarm (buzzer or radio) will sound for 30 minutes. To stop the active alarm,
press the respective ALARM button (1 or 2) or the ON/OFF button (9) once. The alarm will stop
and come back on again at the set time.
Snooze Function
The snooze function allows you to delay an active alarm for 9 minutes. To do so, press the
SNOOZE button (5) once while the alarm is active. The alarm will stop and come on again after
9 minutes. To cancel this function, press the ON/OFF button (9) once.
Nap Function
The nap function enables you to set a timer after which the buzzer will sound.
• During clock display mode, repeatedly press the NAP button (1) to select a desired dura-
tion until the buzzer sounds.
• You can select 90, 80, 70, 60, 50, 40, 30, 20, or 10 minutes.
• To check the remaining time on the timer, press the NAP button (1) once.
• To disable the alarm once it sounds, press the ON/OFF button (9).
• If you want to cancel the function, press the NAP button (1) repeatedly until “OFF” ap-
pears in the display.
Date Display
• To display the date, press the Y-M-D button (7) once during regular clock display. This will
show the year.