Operation Manual

EN | 13
EN
Location Of Controls
1. Antenna
2. Power Indicator
3. Tuning Scale
4. Tuning Wheel
5. OFF/Volume Control
6. Band Selector (FM/MW/LW)
7. Headphone Connector
8. Battery Compartment
9. AC Mains Connector
10. AUX Input
1
23
4
5
6
7
8 9
10
Power Supply
Battery Operation
1. Remove the battery compartment cover by gently pushing it towards the right.
2. Install 4x “AA” size batteries (UM-3, not included) and take care that the correct polarities are
observed.
3. Replace the battery compartment cover.
Notes:
• The AC line cord must be removed for battery operation.
• To avoid damage which may result from leaking batteries, remove the batteries when they be-
come exhausted or when the unit is not to be used for a long period of time.
AC Mains Operation
1. Before making any connections, check that the voltage marked on the rating label located at the
back of the unit corresponds with your household supply.
2. Insert the AC line cord plug into the AC mains connector at the back of the unit and plug the other
end of the cord into a standard household supply outlet.