Operation Manual

ENG Page 7 of 10
z
Save Station
To save the received station as preset station:
(1) Tune to the station that you want to save.
(2) Press and hold the Control Wheel to save it.
(3) To save the station, press the V- or V+ key to select a position for the station,
and then press the Control Wheel to confirm. To cancel saving, turn the
Control Wheel downward to switch to the “NO” option and then press the
Control Wheel to confirm.
z
Switch Station
Press the Control Wheel to switch to the “Preset” mode, and move the Control
Wheel to switch the preset stations.
z
Delete Station
To delete the preset station:
(1) Switch to the “Preset” mode.
(2) Switch to the station that you want to delete.
(3) Press and hold the Control Wheel to delete it.
(4) Press the Control Wheel to confirm. Or, turn the Control Wheel to switch to
“NO” option and then press the Control Wheel to cancel deletion.
z
FM Encoding
You can encode the FM radio programs to MP3 or WAV file. When you are listening
to the station, press the A-B key to record the programs. For detail information about
recording, see the “Voice Recording” section. The encoded content is stored in the
RADIO folder.
You can set the recording format or sensitivity before encoding. For detail
information about record setting, see the “Recording Setting” section.
14 Customizing Settings
On the main menu, select the “Tools” item and press the Control Wheel to enter the
system settings mode.
z
Timer
1 Play Time
To set the continuous playback time before which the player is turned off
automatically, select the “Play Time” option, and move the Control Wheel to specify
the time.
2. Shutdown
To set the length of time after which the player is turned off automatically when there
is no activity, select the “Shutdown” option, and move the Control Wheel to specify
the time.
z
Screen
1.
Backlight
To specify the backlight time, select “Backlight” and move the Control Wheel to
specify the time.
2. Contrast
To set the LCD contrast, select “Contrast” and move the Control Wheel to adjust the
contrast level.
z
Format
To format the player, you can use the “Format” option.
(1) Select the “Format” option and then press the Control Wheel to continue.
(2) Turn the Control Wheel downward to select “Yes” option and then press the
Control Wheel to start formatting.
Note: You are recommended strongly to use the “Format” option to format the
device.