Operation Manual

English - 53 -
Install Menu
Program
Press “ ” or “ ” button to select Program. Use “ ” or “
” button to select the program number. You can also enter
a number using the numeric buttons on the remote control.
There are 200 programme storage between 0 and 199.
Band
Band can be selected either C or S. Press “ ” or “ ” button
to set Band.
Channel
Channel can be changed by “ ” or “ ” button or numeric
buttons.
Colour System
Press “ ” or “ ” button to select Colour System. Use “ ”
or “ ” button to change the colour system to PAL, PAL 60,
SECAM or AUTO.
Sound System
Press “ ” or “ ” button to select Sound System. Press “
” or “ ” button to change the sound system to BG,DK,
I, L or L’.
Fine Tune
Press “ ” or “ ” button to select Fine Tune. Press “ ” or “
” button to adjust the tuning.
Search
Press “ ” or “ ” button to select Search. Use “ ” or “ ”
button to start programme searching. You can also enter the
desired frequency using the numeric buttons while Search
item is highlighted.
Store
Press “ ” or “ ” button to select Store. Press “ ” or OK
button to store the settings. “ Stored... ” will be displayed
on the screen.
Install Menu in AV Modes
The following screen appears in the install menu when
the TV is in AV modes. Note that limited options will be
available. Switch to TV mode for viewing complete version
of the Install menu.
Colour System
Press “ ” or “ ” button to select Colour System . Use “ ”
or “ ” button to change the colour system to PAL, SECAM,
PAL60, AUTO, NTSC 4,43 or NTSC 3,58.
Store
Press “ ” or “ ” button to select Store Program . Press “
” or “OK” button to store the settings. “ Stored... ” will be
displayed on the screen.
Program Table
Select Program Table by pressing “ ” or “ ” button. Press
“ ” to display Program Table:
By moving the cursor in four directions you can reach 20
programmes in the same page. You can scroll the pages
up or down by pressing the navigation buttons to see all
the programmes in TV mode (except for the AV modes). By
cursor action, programme selection is done automatically.
Name
To change the name of a programme, select the programme
and press the RED button.
The first letter of the selected name will be highlighted.
Press “
” or “ ” button to change that letter and “ ” or “
” button to select the other letters. By pressing the RED
button, you can store the name.
Move
Select the programme which you want to move by
navigation buttons. Press the GREEN button. By navigation
02_MB45_[GB]_1055UK_IDTV_BRONZE11_22855W_10065354_50156390.indd 5302_MB45_[GB]_1055UK_IDTV_BRONZE11_22855W_10065354_50156390.indd 53 28.09.2009 17:59:2228.09.2009 17:59:22