Operation Manual
20 | EN
DAB Manual Tuning
1. To select manual tune, press and hold the MENU/INFO button for 2 seconds to enter the
menu, then press the TUN/CH▲ or TUN/CH▼ button to select “Manual tune” (F.4, F.5).
2. Press TUN/CH▲ or TUN/CH▼ button to move through the DAB channels, the display
will show “5A to 13F” and their associated frequencies.
3. When your desired frequency appears in the display, press the SELECT button to listen,
the name of the station group (ensemble/multiplex) will be displayed.
Prune
You can remove all unavailable stations from the list:
1. In DAB mode press and hold the MENU/INFO button for 2 seconds to enter the menu,
then press the TUN/CH▲ or TUN/CH▼ button to select “Prune” and nally press the
SELECT button to conrm.
2. Press the TUN/CH▲ or TUN/CH▼ button to select <Yes> to conrm to delete. Or select
<No> to cancel. Press the SELECT button to conrm the setting.
DAB Display Modes
Every time you press the MENU/INFO button the display will cycle through the following display
modes:
Signal strength, Programme Type, Ensemble Name, Channel number/frequency, Signal error,
Bit Rate, codec/DAB variant, power status (Mains/Battery), Time and Date.
FM Radio
1. Press the STANDBY button to switch on the radio.
2. Press the MODE button to switch to FM mode. The display will show the frequency.
3. To automatically search for the next available radio station, press and hold for 2 seconds
the TUN/CH▲ or TUN/CH▼ button. The display will show “Scanning...” and it will stop
automatically once a station has been found (F.6, F7).
4. To manually search for a station, press the TUN/CH▲ or TUN/CH▼ button repeatedly.
Each press adjusts the frequency by 0.05 MHz.
Note:
• To improve the reception, fully extend the antenna and adjust its position, or try moving
the radio to another location.