Operation Manual

Note:
• You can learn limited set of buttons on RCU660. Available buttons are shown
on the image.
• When you can not choose any more RCU660 buttons for learning, it means
that remote memory is full (RCU660 has limit for total 60 buttons).
•
The learning mode is automatically terminated if no entry occurs during 14
seconds period.
• Press TV button and Number 6 button can delete all codes you have learnt for
all devices.
Display device code
1. Press and hold the device button, simultaneously press button 1 to display
the thousands of the 4-figure code. Count how often the LED flashes, if the
LED does not flash, then the number is zero.
2. Press and hold the device button, simultaneously press button 2 to display
the hundreds of the 4-figure code.
3. Press and hold the device button, simultaneously press button 3 to display
the tens of the 4-figure code.
4. Press and hold the device button, simultaneously press button 4 to display
the ones of the 4-figure code.
For example for code 0169 for TV:
1. Press TV and 1 LED flashes Zero time
2. Press TV and 2 LED flashes One time
3. Press TV and 3 LED flashes Six times
4. Press TV and 4 LED flashes Nine times
Reset / Delete Function
Just simply press TV button and Button 0 together, when LED flashes
three times, now all settings will be deleted, and remote go back to
factory default settings.
12