Operation Manual
English - 61 -
Analogue Teletext
Use of teletext and its functions are identical to
the analogue text system. Please do refer to the
“TELETEXT” explanations.
Widescreen
Depending on the type of the broadcast being
transmitted, programmes can be viewed in a number
of formats. Press the “SCREEN” button repeatedly
to change screen format.
When Auto is selected, the format being displayed is
determined by the picture being broadcast.
PLEASE NOTE: Menu size changes depending on
the chosen image size.
IDTV Menu System
• Press MENU button and DTV main menu will be
displayed.
You can use following buttons for Move, Delete and
Lock functions.
Channel List
Using “ ” or “ ” buttons on the remote control in
main menu, make sure that the rst item, Channel
List, is highlighted and press the OK button to display
the Channel List.
• Channel List is the place where the channels are
managed.
YELLOW: Tags/untags the selected channel.
BLUE: Tags/untags all channels.
Navigating the Entire Channel List
• Press “ ” or “ ” keys for selecting the previous or
next channel.
• You can press or buttons to move page up or
page down.
• To watch a speci c channel, highlight it using “ ”
or “ ” buttons and then press OK button, while the
“Select” item on Channel List menu is highlighted
via “ ” or “ ” buttons.
Moving the channels in the channel
list
• Press “ ” or “ ” buttons to select the channel that
will be moved.
• Press “ ” or “ ” buttons to select the ‘’Move’’ item
on Channel List menu and press OK to con rm.
Note: If you enter the same programme number of
the channel that you want to move, “....services will
be replaced. Do you want to continue?” OSD will
be displayed. Press OK to con rm or select “No”
to cancel.
Deleting the Channels in the Channel
List
• Press “ ” or “ ” buttons to select the channel that
will be deleted.
• Press “ ” or “ ” buttons to select the “Delete’’ item
on Channel List OSD.
Press “OK’ button to delete the highlighted channel
in the channel list. Then the message below appears
on the screen.
Renaming channels
To rename a speci c channel, the channel must be
highlighted via pressing “ ” or “ ” buttons and then
highlight the “Edit Name” item by pressing “ ” or “
” buttons. Press “OK” button to activate rename
feature.
Now pressing “ ” or “ ” buttons moves to the
previous/next character. Pressing “ ” or “ ” buttons
toggles the current character, i.e., ‘b’ character