Operation Manual

English - 47 -
S/PDIF Coaxial Out5. outputs digital audio signals of the currently watched source.
Use an SPDIF coaxial cable to trasfer audio signals to a device that has S/PDIF input
Viewing the Connections - Side Connectors
CI Slot is used for inserting a CI card. A CI card allows you to view 1.
all the channels that you subscribe to. For more information, see
“Conditional Access” section.
Side USB input.2.
Video Input is used for connecting video signals of external devices.3.
Connect the video cable between the VIDEO IN socket on the TV
and the VIDEO OUT jack on your device.
Audio Inputs are used for connecting audio signals of external 4.
devices. Connect the audio cable between the AUDIO INPUTS on
the TV and the AUDIO OUTPUT jacks on your device. Note: If you
connect a device to the TV via the VIDEO INPUT, you should also
connect your device with an audio cable to the AUDIO INPUTS of the
TV to enable audio.
Headphone jack is used for connecting an external headphone to the 5.
system. Connect to the HEADPHONE jack to listen to the TV from
headphones (optional).
Power Connection
IMPORTANT: The TV set is designed to operate on 220-240V AC, 50 Hz.
After unpacking, allow the TV set to reach the ambient room temperature before you connect the set to the •
mains. Plug the power cable to the mains socket outlet.
Aerial Connection
Connect the aerial ,cable TV plug to the AERIAL INPUT socket located at the rear of the TV.•
02_[GB]_MB60_woypbpr_3920UK_IDTV_32875W_BRONZE17_10070942_50179139.indd 47 26.10.2010 14:30:34