Datasheet

2 EMC/EMI Products Schaffner Group Datasheets 2017
RT Series
Selection table convection *forced cooling Inductance **typ. Inductance Resistance Choke ***Ø Pin Weight
cooling nominal 3 m/s nominal Ln @ 25˚C Ls @ 25˚C R @ 25˚C
current @ 60˚C current @ 60˚C 100kHz 100kHz ±0.1
[A] [A] [mH/path] [μH/path] [mΩ/path] [size] ØP [mm] [g]
RT 8122-6-10M0 6 9.5 10 30 33 1 1.1 80
RT 8122-8-8M0 8 12.5 8 24.8 21 1 1.3 80
RT 8122-10-6M0 10 16 6 19.2 16 1 1.4 80
RT 8122-12-5M0 12 19 5 20.5 14 2 1.5 100
RT 8122-16-4M0 16 27 4 17.6 10 2 1.8 110
RT 8122-20-3M0 20 32 3 13.5 7 3 2 160
RT 8522-6-10M0 6 9.5 10 31.5 33 4 1.1 70
RT 8522-8-8M0 8 12.5 8 24 21 4 1.3 80
RT 8522-10-6M0 10 16 6 19.2 16 4 1.4 80
RT 8522-12-5M0 12 19 5 23 14 5 1.5 90
RT 8522-16-4M0 16 27 4 18.8 10 5 1.8 110
RT 8522-20-3M0 20 32 3 13.5 7 6 2.0 150
RT 8132-6-6M0 6 9.5 6 18 27 7 1.1 80
RT 8132-8-4M8 8 12.5 4.8 14.9 17 7 1.3 90
RT 8132-10-4M0 10 16 4 16 15 8 1.5 110
RT 8132-12-3M6 12 19 3.6 14.4 12 8 1.6 120
RT 8132-16-3M0 16 27 3 12 8 9 1.8 170
RT 8132-20-2M5 20 32 2.5 10 7 9 2.1 190
RT 8532-6-6M0 6 9.5 6 18 27 10 1.1 90
RT 8532-8-4M8 8 12.5 4.8 13.9 17 10 1.3 90
RT 8532-10-4M0 10 16 4 16 15 11 1.5 110
RT 8532-12-3M6 12 19 3.6 15.1 12 11 1.6 120
RT 8532-16-3M0 16 27 3 13.8 8 12 1.8 160
RT 8532-20-2M5 20 32 2.5 10.8 7 12 2.1 190
Test conditions: Inductance tolerance: +50%, –30%; Resistance tolerance: +15% @ 25°C; Electrical characteristics @ 25°C: ±2°C
* typical current for forced cooling with 3 m/s. Due to the possible turbulences and degradation of the air stream within an equipment please consider thermal
validation.
** typical stray inductance, max is 0.1% of Ln
*** Length of pin (Dimension P) is always 5.5 mm ± 1
Product selector
Examples: RT 8532-16-3M0: Vertical 3-line choke for 16 A, with 3 mH ; RT 8122-20-3M0: Horizontal 2-line choke for 20 A, with 3 mH