Datasheet

ManualsBrandsSCHAFFNER ManualsHF & EMC ComponentsEMI filter 250 Vac 1 A 68 mH (L x W x H) 41.8 x 43 x 25 mm 1 pc(s)

Current-compensated Chokes

n Rated currents from 0.3 to 10A

n DC to 1kHz frequency

n 100kHz to 3MHz common-mode

resonance frequency

n Dual-choke conﬁgurations

n Multiple PCB-mounting options

Typical applications

RN chokes are attenuating common-mode or

asymmetric (P/N –> E) interference signals,

by being connected in series with the phase

and neutral lines of an AC powerline input.

Symmetrical components of the noise are

also attenuated by the leakage inductance of

the windings. These chokes are typically used

in conjunction with suppression capacitors.

n High saturation resistance and excellent

thermal behavior.

n Through hole pin connections.

n Dual-choke configuration.

n Small compact design.

n Multiple housing options.

n Custom-specific versions are available on

request.

n Phase-angle control circuits in combination

with saturating chokes

n EMI input filters

n For suppressing equipment with no earth

connection

n Suppressing high interference levels

Features and benefits

Technical specifications

Maximum continuous operating voltage: 250VAC @ 40°C

Operating frequency: dc to 1kHz

Rated currents: 0.3 to 10A @ 40°C max.

High potential test voltage

winding-to-winding @ 25°C: 1500VAC, 60 sec, guaranteed

1500V, 50Hz, 2 sec, factory test

winding-to-housing @ 25°C: 4000VAC, 60 sec, guaranteed

Surge current @ 10msec: 20 x I

nominal

@ 25°C

Temperature range (operation and storage): -40°C to +125°C (40/125/56)

Flammability corresponding to: UL 94V-0

MTBF @ 40°C/230V (Mil-HB-217F): > 5,000,000 hours

Typical electrical schematic

Approvals

VDE: excluding RN 102, RN 202

EMC/EMI Chokes

RN series

Summary of content (5 pages)

PAGE 1
EMC/EMI Chokes RN series Current-compensated Chokes n n n n n Rated currents from 0.3 to 10A DC to 1kHz frequency 100kHz to 3MHz common-mode resonance frequency Dual-choke configurations Multiple PCB-mounting options VDE: excluding RN 102, RN 202 Typical electrical schematic Technical specifications Maximum continuous operating voltage: Operating frequency: Rated currents: High potential test voltage winding-to-winding @ 25°C: Approvals 250VAC @ 40°C dc to 1kHz 0.3 to 10A @ 40°C max.
PAGE 2
> Components > RN series Choke selection table Choke* Nominal current @ 40°C Inductance L Resistance R x02-0.3-02 x02-0.6-02 x02-1-02 x02-1.5-02 x02-2-02 [A] 0.3 0.6 1 1.5 2 [mH/path] 12 4.4 3 1.6 1.1 [mΩ/path] 1275 385 205 100 70 RN x12-0.4-02 RN x12-0.5-02 RN x12-0.6-02 RN x12-0.8-02 RN x12-1.2-02 RN x12-1.5-02 RN x12-2-02 RN x12-4-02 0.4 0.5 0.6 0.8 1.2 1.5 2 4 39 27 15 10 6.8 3.3 1.8 0.7 1460 1250 465 370 245 135 75 27 2 2 2 2 2 2 2 2 RN x14-0.3-02 RN x14-0.5-02 RN x14-0.
PAGE 3
> Components > RN series Typical choke attenuation/resonance frequency characteristics Per CISPR 17; 50Ω/50Ω asym RN x02 RN x12 RN x14 RN x42 RN 143 RN 152 Typical saturation characteristics Inductance (typical value in %) vs.
PAGE 4
> Components > RN series Mechanical data RN 112, RN 114, RN 122, RN 142, RN 143 RN 102 A A E 4 2 4 1 3 H B G 2 I 3 G C 2 3 1 2 4 1 3 E H 1 B F L 4 I F D L RN 202 C D RN 212, RN 214, RN 222, RN 242 A A 3 3 4 H 3 H B 1 2 4 4 E 2 2 3 4 1 2 E B 1 1 I F G F G C C D D RN 152 A 1 3 H E 3 1 4 2 B 2 4 F G C D Dimensions A B C D E F G H I L RN 102 RN 112 RN 114 RN 122 RN 202 RN 212 RN 214 RN 222 RN 142 RN 143 RN 242 RN 152 14 1
PAGE 5
Headquarters and global innovation and development center Schaffner Group Nordstrasse 11 4542 Luterbach Switzerland T +41 32 681 66 26 F +41 32 681 66 30 info@schaffner.ch www.schaffner.com Sales and application centers China Schaffner EMC Ltd. Shanghai Building 11, Lane 1365 East Kangqiao Road Shanghai 201319 T +86 21 6813 9855 F +86 21 6813 9811 cschina@schaffner.com www.schaffner.