Datasheet

151 EMC Components
* Not suitable for PCB-mounting.
Explanations:
– t
r
rise time at given load resistor R and 70% of the output pulse height.
– L
p
primary inductance measured at 1kHz (secondary coile open).
– L
str
stray inductance measured at the secondary side, short circuit at the primary side. If there are several secondary coils only one at the time is connected (measuring frequency 10kHz).
– The ignition current is a set peak value where the voltage drop over the coil resistance is still insignificant (mostly below 1V).
Pulse transformer selection table
IT 155 1:1 0.1 500 4 480 1 5 85 1.2 1.2 6 02 13
IT 245 1:1 0.1 750 4 500 1.2 8 100 1.48 1.48 10 02 6
IT 237 1:1 0.25 500 2.5 1100 1 25 35 1.9 2.2 50 02 14
IT 239 1:1 0.25 1000 6 300 2.3 3 80 0.9 0.9 5 02 13
IT 255 1:1 0.25 750 4 250 1.1 2.2 40 0.8 0.8 8 02 6
IT 258 1:1 1 750 3.2 250 0.25 2.5 3 0.62 0.75 80 02 6
IT 370 1:1 1 1000 5 4000 0.6 0.3 6 0.16 0.18 40 02 71
IT 364* 1:1 3 3000 8 5000 1.7 1.5 10 0.16 0.14 35 05 220
IT 246 2:1 0.1 750 4 200 0.4 7 35 2.1 1.1 7 02 6
IT 248 2:1 0.25 750 3.2 350 2.2 17 80 3.2 1.6 9 02 6
IT 362* 2:1 3 1000 5 3500 0.4 3 25 2.4 0.3 20 05 360
IT 260 3:1 0.1 500 3.2 200 0.3 12 30 2 0.8 8 02 6
Pulse transformer Turns ratio Ignition Voltage Voltage Rise Inductance Resistance Coupling Input/Output Weight
current time area time capacitance connections
I
ign
U
nom
U
p
V
0t
t
r
L
p
L
str
R
p
R
s
C
k
[A] [V] [kV] [Vµs] [µs] [mH] [µH] [Ω] [Ω] [pF] [g]
> IT series