Datasheet

3 EMC/EMI Products Schaffner Group Datasheets 2017
100 and 150 A types (-28) 100 A type (-34)
Note: in favour of a better readability, connectors and earth studs are not shown in the horizontal projection.
Dimensions
16 A (-06) 16 A (-29) 25 A (-24) 25 A (-33) 36 A (-24) 36 A (-33) 50 A (-24) 50 A (-33) 100 A (-28) 100 A (-34) 150 A
A 149 189.5 140 189.5 140 189.5 143.25 192 250 250 340
B* 104 105 105 105 105 105 122 122 160 160 160
C 50 80 80 80 80 80 102 102 130 130 130
D 140 140 140 142.5 210 210 300
E 44 ±0.3 165.5 44 ±0.3 165.5 44 ±0.3 165.5 44 ±0.3 168 230 230 320
F 75 ±0.3 80 75 ±0.3 50 75 ±0.3 50 75 ±0.3 98 60 65 60
G M5 x 7 13 x 6.5 M5 x 7 13 x 6.5 M5 x 7 13 x 6.5 M5 x 7 13 x 6.5 13 x 6.5 13 x 6.5 13 x 6.5
H 0.7 0.7 0.7 0.7 1 1 1
I 11 10.9 25.4 25 25.4 25 25.4 25 34 39 34
J 6.3 x 0.8 M6 M6 M6 M6 M6 M6 M6 M10 M10 M10
K 52 82 52.5 52.5 52.5 52.5 61 61 80 116 80
L 22.5 25 46.5 20 46.5 20 68.5 35 65 40 65
* Rivets exceed this dimension by max. 1.3mm on each side.
All dimensions in mm; 1 inch = 25.4 mm
Tolerances according: ISO 2768-m/EN 22768-m
Filter input/output connector cross sections
-06 (6.3 x 0.8mm) -24 (M6) -28 (M10) -29 -33 -34
Solid wire n/a n/a n/a
6 mm
2
16 mm
2
35 mm
2
Flex wire n/a n/a n/a
4 mm
2
10 mm
2
25 mm
2
AWG type wire n/a n/a n/a AWG 10 AWG 6 AWG 2
Recommended torque n/a 3.5 4.0 Nm 15-17 Nm 0.6-0.8 Nm 1.5-1.8 Nm 4.0-4.5 Nm
Please visit www.schaffner.com
to find more details on filter connectors.