Datasheet
EMC/EMI Products
General Purpose Power Entry Module
with Mains Switch
Approvalsn Rated currents up to 10A
n 1-pole rocker switch
n Snap-in versions (S and S1 type)
n Compact to fit 1U rack size
Typical applications
The FN9263 power entry module combines
an IEC inlet, mains filter with excellent filter
attenuation and a mains switch in a small
form factor. Choosing the FN9263 product
line brings you the rapid availability of a
standard filter associated with the necessary
safety acceptances. Standard IEC connector
filters are a practical solution helping you
to pass EMI system approval in a short time.
A wide selection on amperage ratings and
mounting possibilities are designed to offer
you the desired solution.
n Exceptional conducted attenuation
performance, based on chokes with high
saturation resistance and excellent thermal
behavior.
n Rear/front or snap-in mounting.
n Small compact housing fitting 1U rack
applications.
n Versions up to 10A are available with
1 pole rocker switch.
n Custom-specific versions are available on
request.
n Portable electrical and electronic
equipment
n Small to medium-sized machines and
household equipment
n Single-phase power supplies, switch-mode
power supplies
n Test and measurement equipment
n Rack mounting equipment
Features and benefits
Technical specifications
Maximum continuous operating voltage: 250VAC, 50/60Hz
Operating frequency: 50 to 400Hz
Rated currents: 1 to 10A @ 40°C max.
High potential test voltage for capacitors: P –> PE 2000VAC for 2 sec
P –> N 760VAC for 2 sec
Protection category: IP40 according to IEC 60529
Temperature range (operation and storage): -25°C to +85°C (25/85/21)
Design corresponding to: UL 1283, CSA 22.2 No. 8 1986, IEC/EN 60939
Flammability corresponding to: UL 94V-2 or better
MTBF @ 40°C/230V (Mil-HB-217F): 6,500,000 hours
Rocker switch description:
Function: 1-pole, dark not illuminated
Marking I - 0
Electrical specifications: Inrush current 78A
10,000 on-off operations according to UL 1054, TV 5
Switch ratings:
USA (UL): 10A, 125VAC; 8A, 250VAC; 1/4HP
Canada (CSA): 10A, 250VAC; 1/4HP
Europe (ENEC): 10A (4A), 250VAC*
Typical electrical schematic
N
PE
P
Line Switch
Cx R 2xL 2xCy
N‘
PE
P‘
Load
* Value in () relates to the inductive current charge: cos g = 0.65
IEC Inlet Filters
FN9263