Datasheet

ManualsBrandsSCHAFFNER ManualsHF & EMC ComponentsMains filter + IEC socket, + fuse 250 Vac 2 A (L x W x H) 60.3 x 46 x 35 mm 60 pc(s)

The FN 9260 power entry module

combines an IEC inlet, mains filter with

excellent filter attenuation and fuses in a

small form factor. Choosing FN 9260

product line brings you rapid availability of

a standard filter associated with the

necessary safety acceptances. Standard

IEC connector filters are a practical

solution helping you to pass EMI system

approval in a short time. A wide selection

on amperage ratings, output

connections, mounting possibilities and

filters for medical applications are

designed to offer you the desired

solution.

Features and Benefits

Exceptional conducted attenuation

performance, based on chokes with

high saturation resistance and

excellent thermal behavior.

B types comply with the requirements of

IEC/EN 60601-1 for creepage and

clearance, leakage current and high

potential testing.

Versions up to 10A are available with

fuse holder for one or two fuses.

Custom-specific versions are available

on request.

Typical applications

Portable electrical and electronic

equipment

Medical equipment

Small to medium-sized machines and

household equipment

Single-phase power supplies, switch-

mode power supplies

Test and measurement equipment

IEC Inlet Filters

FN 9260

General Purpose Power Entry

Module with Fuses

Rated currents up to 10A

For one or two fuses

Optional safety version (A type)

Complies with IEC/EN 60601-1

Snap-in versions (S type)

Approvals

Technical specifications

Design corresponding to: UL 1283, CSA 22.2 No. 8 1986, IEC/EN

60939

Flammability corresponding to: UL 94V-2 or better

Fuse holder: 1 or 2 fuses (Ø5 x 20mm)

High potential test voltage: P –> PE 2000VAC for 2 sec (standard types)

P –> PE 2500VAC for 2 sec (B types)

P –> N 760VAC for 2 sec (standard types)

P –> N 1700VDC for 2 sec (B types)

Maximum continuous operating voltage: 250VAC, 50/60Hz

MTBF @ 40°C/230V (Mil-HB-217F): 2,200,000 hours

Operating frequency: dc to 400Hz

Protection category: IP40 according to IEC 60529

Rated currents: 1 to 10 A @ 40°C max.

Temperature range (operation and

storage):

-25°C to +85°C (25/85/21)

Typical electrical schematic

Summary of content (5 pages)

PAGE 1
IEC Inlet Filters FN 9260 General Purpose Power Entry Module with Fuses Rated currents up to 10A For one or two fuses Approvals Optional safety version (A type) Complies with IEC/EN 60601-1 Snap-in versions (S type) Technical specifications Design corresponding to: UL 1283, CSA 22.2 No.
PAGE 2
IEC Inlet Filters > FN 9260 Filter selection table Filter FN FN FN FN FN 9260x-1-06-y 9260x-2-06-y 9260x-4-06-y 9260x-6-06-y 9260x-10-06-y FN y FN FN FN FN y 9260xA1-1-06- FN FN FN FN FN y 9260xB-1-06-y 9260xB-2-06-y 9260xB-4-06-y 9260xB-6-06-y 9260xB-10-06- FN FN FN FN FN 261x-1-06-y 261x-2-06-y 261x-4-06-y 261x-6-06-y 261x-10-06-y Rated current Leakage current* Inductance Capacitance Resistance Input/Output Fuses Weight @ 40°C (25°C) @ 230VAC/50Hz L Cx Cy R connections 9260xA-2-06-y 9260xA-4-06-
PAGE 3
PAGE 4
IEC Inlet Filters > FN 9260 Mechanical data FN 9260 / FN 261 FN 9260S / FN 261S Dimensions A B C D E F G H I J M N P R S T* T* T* FN 261 FN 9260 46 35 36 41 27.8 5.5 32 Ø3.2 13.8 12.5 R ≤ 3.5 33 29 M3 90° FN 261S FN 9260S 34 35 41 27.8 5.5 32 13.8 12.5 R ≤ 3.5 33 29.5 Tolerances ±0.3 ±0.3 ±0.3 ±0.3 +0.3/-0 ±0.3 +0.3/-0 ±0.1 ±0.3 +0.3/-0 ±0.3 0.6 - 1.5 1.6 - 2.5 2.6 - 3.5 * For selec ting the panel thic kness, please refer to the filter selec tor table. All dimensions in mm; 1 inc h = 25.
PAGE 5
Headquarters, global innovation and development center Schaffner Group Nordstrasse 11 4542 Luterbach Switzerland T +41 32 681 66 26 F +41 32 681 66 30 info@schaffner.com www.schaffner.com Sales and application centers China Schaffner EMC Ltd. Shanghai T20-3, No 565 Chuangye Road Pudong New Area 201201 Shanghai T +86 21 3813 9500 F F +86 21 3813 9501 / 02 cs china@s chaffner.com http://www.s chaffner.com.