Datasheet

ManualsBrandsSCHAFFNER ManualsHF & EMC ComponentsMains filter + IEC socket 250 Vac 6 A (L x W x H) 57.9 x 48 x 22.5 mm 120 pc(s)

The FN 9222 IEC inlet filter combines an

IEC inlet and mains filter with excellent

filter attenuation in a small form factor.

Choosing the FN 9222 product line brings

you the rapid availability of a standard

filter associated with the necessary

safety acceptances. Standard IEC

connector filters are a practical solution

helping you to pass EMI system approval

in a short time. A wide selection on

amperage ratings, output connections,

mounting possibilities and filters for

medical applications are designed to

offer you the desired solution.

Features and benefits

Exceptional conducted attenuation

performance, based on chokes with

high saturation resistance and

excellent thermal behavior.

Rear/front or snap-in mounting.

Wide mounting flanges available.

Optional medical versions (B type)

comply with the requirements of IEC/EN

60601-1 for creepage and clearance,

leakage current and high potential

testing.

12 and 15A types with hot inlet

available.

Optional surge pulse protection.

Different output connections offering

maximum flexibility for assembly.

Custom-specific versions are available

on request.

Typical applications

Portable electrical and electronic

equipment

Small to medium-sized machines and

household equipment

Single-phase power supplies, switch-

mode power supplies

Test and measurement equipment

Medical equipment

Rack mounting equipment

IEC Inlet Filters

FN 9222

General Performance IEC Inlet Filter

Rated currents up to 20A

Excellent performance/size ratio

Complies with IEC/EN 60601-1

Snap-in versions (S and S1 type)

Hot inlet versions (HI type)

Optional overvoltage protection (Z

type)

Approvals

(CQC except HI-types)

Technical specifications

Approvals by rated current: 1 to 10A (ENEC, CQC)

16A (ENEC, CQC) for 16 and 20A types

1 to 20A (UL, CSA)

Design corresponding to: UL 1283, CSA 22.2 No. 8 1986, IEC/EN

60939 (X to XX A, not Z types)

Flammability corresponding to: UL 94V-2 or better

High potential test voltage: P –> PE 2000VAC for 2 sec (standard types)

P –> PE 2500VAC for 2 sec (B types)

P –> N 1000VAC for 2 sec (1 to 10A types,

not Z types)

P –> N 250VAC for 2 sec (all Z types)

P –> N 1100VDC for 2 sec (16 and 20A

types, not Z types)

Maximum continuous operating voltage: 250VAC, 50/60Hz

MTBF @ 40°C/230V (Mil-HB-217F): ≤15A: 3,040,000 hours

≥16A: 2,256,000 hours

Operating frequency: dc to 400Hz

Protection category: IP40 according to IEC 60529

Rated currents: 1 to 20 A @ 50°C

Surge pulse protection (optional): 2kV, IEC 61000-4-5

Temperature range (operation and

storage):

-25°C to +85°C (25/85/21)

Typical electrical schematic

Summary of content (6 pages)

PAGE 1
IEC Inlet Filters FN 9222 General Performance IEC Inlet Filter Rated currents up to 20A Excellent performance/size ratio Approvals Complies with IEC/EN 60601-1 Snap-in versions (S and S1 type) Hot inlet versions (HI type) Optional overvoltage protection (Z type) Technical specifications Approvals by rated current: 1 to 10A (ENEC, CQC) 16A (ENEC, CQC) for 16 and 20A types 1 to 20A (UL, CSA) Design corresponding to: UL 1283, CSA 22.2 No.
PAGE 2
IEC Inlet Filters > FN 9222 Filter selection table Filter Rated current Leakage current* Inductance Capacitance Resistance Output connections @ 50°C (25°C) @ 250VAC/50Hz L Cx Cy R FN FN FN FN FN FN FN FN FN 9222x-1-.. 9222x-3-.. 9222x-6-.. 9222x-8-.. 9222x-10-.. 9222x-12-.. 9222x-15-.. 9222x-12-..HI 9222x-15-..HI [A] 1 (1.2) 3 (3.5) 6 (7.2) 8 (10.6) 10 (11.6) 12 (12) 15 (15) 12 (12) 15 (15) [µA] 373 373 373 373 373 373 373 373 373 [mH] 12 2.5 0.78 0.5 0.225 0.11 0.075 0.11 0.075 [µF] 0.1 0.1 0.1 0.
PAGE 3
IEC Inlet Filters > FN 9222 Product selector For example: FN 9222E-15-06, FN 9222ES 1B-10-06-20, FN 9222ER-12-06HI, FN 9222EUB-8-06-20 Typical filter attenuation Per CISPR 17; A = 50Ω/50Ω sym; B = 50Ω/50Ω asym; C = 0.1Ω/100Ω sym; D = 100Ω/0.
PAGE 4
IEC Inlet Filters > FN 9222 Mechanical data FN 9222 1 to 15A types FN 9222, 16 and 20A types FN 9222S FN 9222S1 FN 9222-HI FN 9222U -07 connection style Panel cut out Installation
PAGE 5
IEC Inlet Filters > FN 9222 Dimensions A B C D E F G H I J M N P R S T* T* X Y Z FN 9222 1 to 8A 10 to 15A 16 and 20A 48 22.5 40 ±0.2 38.4 27.8 5.5 20.1 Ø3.3 14 13.3 R≤3 21.5 28.5 M3 90° 48 22.5 40 ±0.2 38.4 27.8 5.5 20.1 Ø3.3 14 13.3 R≤3 21.5 28.5 M3 90° 53 30 42 ±0.2 66 34 4 26.5 Ø3.5 14 13.3 R≤3 27 34.7 M3 90° AWG 18 160 6 AWG 16 160 6 FN 9222U FN 9222UZ FN 9222S 1 to 8A 10 to 15A FN 9222S1 1 to 8A 10 to 15A 51.85 25 40 ±0.2 38.25 27.8 5.5 20.1 Ø3.3 14.1 13.3 R≤3 21.5 28.5 M3 90° 51.
PAGE 6
Headquarters, global innovation and development center Schaffner Group Nordstrasse 11 4542 Luterbach Switzerland T +41 32 681 66 26 F +41 32 681 66 30 info@schaffner.com www.schaffner.com Sales and application centers China Schaffner EMC Ltd. Shanghai T20-3, No 565 Chuangye Road Pudong New Area 201201 Shanghai T +86 21 3813 9500 F F +86 21 3813 9501 / 02 cs china@s chaffner.com http://www.s chaffner.com.