Datasheet

ManualsBrandsSCHAFFNER ManualsHF & EMC ComponentsEMI filter 1-phase 250 Vac 12 A (L x W x H) 119 x 105 x 57 mm 10 pc(s)

Features and benefits

High component values optimized for

com- mon and differential-mode

attenuation in the lower frequency

range makes this filter ideal for a large

variety of single-phase motor drive

applications.

Supplied in a relatively small housing

design with safety terminal blocks for

fast and easy installation in primarily

industrial environments.

FN 350 also meets IEC 60950

requirements, thus providing additional

application flexibility.

Typical applications

Single-phase motor drives

Automation equipment

Power supplies, SMPS

Office equipment

Testing and measurements equipment

Single-Phase Filters

FN 350

Single-phase EMC/RFI Filter for

Motor Drives

Compact filter solution for single-

phase motor drive applications

Industrial grade safety terminal

blocks

Designed to meet EN 55011/14/22

Compliant with IEC 60950

Approvals

Technical specifications

Maximum continuous operating voltage: 1x 250VAC

Operating frequency: dc to 400Hz

Rated currents: 8 to 55 A @ 40°C

High potential test voltage: P –> E 2000VAC for 2 sec

P –> N 1100VDC for 2 sec

Protection category: IP20

Overload capability: 4x rated current at switch on,

1.5x rated current for 1 minute, once per

hour

Temperature range (operation and

storage):

-25°C to +100°C (25/100/21)

Flammability corresponding to: UL 94V-2 or better

Design corresponding to: UL 1283, CSA 22.2 No. 8 1986, IEC/EN

60939

MTBF @ 40°C/230V (Mil-HB-217F): 420,000 hours

Typical electrical schematic

Summary of content (4 pages)

PAGE 1
Single-Phase Filters FN 350 Single-phase EMC/RFI Filter for Motor Drives Compact filter solution for singlephase motor drive applications Approvals Industrial grade safety terminal blocks Designed to meet EN 55011/14/22 Compliant with IEC 60950 Technical specifications Typical electrical schematic Features and benefits Typical applications Maximum continuous operating voltage: 1x 250VAC Operating frequency: dc to 400Hz Rated currents: 8 to 55 A @ 40°C High potential test voltage: P –> E 2000VAC for
PAGE 2
Single-Phase Filters > FN 350 Filter selection table Filter FN FN FN FN FN Rated current @ 40°C (25°C) Leakage current* @ 230VAC/50Hz Power loss @ 25°C/50Hz Input/Output connections [A] 8 (9.0) 12 (13.5) 20 (22.4) 30 (33.6) 55 (61.5) [mA] 4.9 4.9 4.9 5.4 11.0 [W] 5.2 5.7 6.1 6.1 9.9 -29 -29 -29 -33 -33 350-8-29 350-12-29 350-20-29 350-30-33 350-55-33 * Maximum leakage under normal operating c onditions. Note: if the neutral line is interrupted, worst c ase leakage c ould reac h twic e this level.
PAGE 3
Single-Phase Filters > FN 350 Mechanical data 8 to 30A types 55A types Dimensions A B C D E F G H I J K L 8A 99.5 105 57 84.4 51 95 6 x 4.4 0.6 19.5 M6 18 16 12A 99.5 105 57 84.4 51 95 6 x 4.4 0.6 19.5 M6 18 16 20A 99.5 105 57 84.4 51 95 6 x 4.4 0.6 19.5 M6 18 16 30A 99.5 105 57.6 84.4 51 95 6 x 4.4 1.2 25 M6 16 19 55A 180 115 60 85 115 100 6.5 1 25 M6 12.9 18.3 All dimensions in mm; 1 inc h = 25.
PAGE 4
Headquarters, global innovation and development center Schaffner Group Nordstrasse 11 4542 Luterbach Switzerland T +41 32 681 66 26 F +41 32 681 66 30 info@schaffner.com www.schaffner.com Sales and application centers China Schaffner EMC Ltd. Shanghai T20-3, No 565 Chuangye Road Pudong New Area 201201 Shanghai T +86 21 3813 9500 F F +86 21 3813 9501 / 02 cs china@s chaffner.com http://www.s chaffner.com.