Datasheet

* Value in () relates to the induc tive c urrent charge: cosφ = 0.65
The FN 280 power entry module combines
an IEC inlet, a mains filter with single or
dual- fuse holder and a 2-pole rocker
switch in a small form factor. Choosing FN
280 product line brings you the rapid
availability of a standard filter associated
with the necessary safety acceptances.
Standard IEC connector filters are a
practical solution helping you to pass EMI
system approval in a short time. A wide
selection on amperage ratings, fuse
options, mounting possibilities and filters
for medical applications are designed to
offer you the desired solution.
Features and benefits
High conducted attenuation
performance, based on chokes with
high saturation resistance and
excellent thermal behavior.
Rear/front or snap-in mounting.
Single or dual-fuse holder.
2-pole rocker switch.
Custom-specific versions are available
on request.
Typical applications
Portable electrical and electronic
equipment
Consumer goods
EDP and office equipment
Single-phase power supplies, switch-
mode power supplies
Test and measurement equipment
Medical equipment
IEC Inlet Filters
FN 280
Compact filtered power entry
module
Complies with IEC/EN 60601-1
Rated currents up to 10A
Single or dual-fuse holder
Fuses Ø5 x 20mm
2-pole rocker switch
General purpose application
Optional earth line choke (E type)
Optional medical versions (B type)
Approvals
(CQC except HI-types)
Technical specifications
Maximum continuous operating voltage: 250V, 50/60Hz
Operating frequency: 50 to 400 Hz
Rated currents: 1 to 10 A @ 40°C max.
High potential test voltage: P –> PE 2000VAC for 2 sec (standard types)
P –> PE 2500VAC for 2 sec (B types)
P –> N 760VAC for 2 sec
Protection category: IP40 according to IEC 60529
Temperature range (operation and
storage):
-25°C to +85°C (25/85/21)
Design corresponding to: UL 1283, CSA 22.2 No. 8 1986, IEC/EN
60939
Flammability corresponding to: UL 94V-2 or better
MTBF @ 40°C/230V (Mil-HB-217F): 1,500,000 hours
Fuse holder: 1 or 2 fuses (Ø5 x 20mm)
Marking: max. 250V ~ (text is print. below fuse
symbol)
Rocker switch description:
Function: 2-pole, dark not illuminated
Marking I - 0
Electrical specifications: Inrush current 82A
6,000 on-off operations according to UL
1054, TV5
10,000 on-off operations according to ENEC
Mechanical life:: 50,000 cycles
Switch ratings:
USA (UL) and Canada (C-UL): 10A, 125VAC; 10A, 250VAC; 1/3HP
Europe (ENEC): 10A (4A), 250VAC*
Operating frequency: 50 to 400 Hz
Typical electrical schematic