Datasheet

Three-Phase Filters > FN 258
Mechanical data
7 to 55A types (-07) 7 to 130A types (-29, -33, -34, -35)
180 and 250A types (-07) 180 and 250A types (-40)
Note: in favour of a better readability, connectors and earth studs are not shown in the horiz ontal projection.
Dimensions
7A 16A 30A 42A 55A 75A 100A 130A 180A 250A
A 255 305 335 329 329 329 379 439 438 478
B 50 55 60 70 80 80 90 110 110 110
C 126 142 150 185 185 220 220 240 240 240
D 225 275 305 300 300 300 350 400 400 440
E 240 290 320 314 314 314 364 414 413 453
F 25 30 35 45 55 55 65 80 80 80
G 6.5 6.5 6.5 6.5 6.5 6.5 6.5 6.5 6.5 6.5
H 1 1 1 1.5 1.5 1.5 1.5 3 4 4
I 10.9 10.9 25 25 39 39 45 45 51 51
J M5 M5 M5 M6 M6 M6 M10 M10 M10 M10
K 25 27.5 30 35 40 40 45 55 55 55
L 85 100 110 130 105 140 130 140 110 110
X* AWG 16 AWG 14 AWG 10 AWG 8 AWG 6
50mm
2
70mm
2
Y* 300 ±10 300 ±10 400 ±10 500 ±10 500 ±10 500 ±10 500 ±10
Z* 9 9 9 12 12 15 15
* Filters with output wire connections (-07) only.
All dimensions in mm; 1 inc h = 25.4mm
Tolerances according: IS O 2768-m / EN 22768-m
Filter input/output connector cross sections
-29 -33 -34 -35 -40
Solid wire
6mm
2
16mm
2
35mm
2
50mm
2
95mm
2
Flex wire
4mm
2
10mm
2
25mm
2
50mm
2
95mm
2
AWG type wire AWG 10 AWG 6 AWG 2 AWG 1/0 AWG 4/0
Recommended torque 0.6 - 0.8Nm 1.5 - 1.8Nm 4.0 - 4.5Nm 7 - 8Nm 17 - 20Nm
Please visit www.schaffner.com to find more details on filter connectors.
Your local partner: To find your local partner within Schaffner's global network, please go to www.schaffner.com