Schaerer Siena 1 & 2 Betriebsanleitung Operating instructions Manuel d’utilisation Gebruiksaanwijzing Manual de instrucciones Návod k provozu Használati utasítás .............................................. .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 35 . ...................................... Page 69 .................................. Pagina 103 ..................... Página 137 .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
www.schaerer.com Schaerer Siena 1 & 2 Operating instructions V07 / 06.2010 Publisher: Schaerer Ltd., P.O. Box, Allmendweg 8, CH-4528 Zuchwil Edition: Version 07 / 06.2010 Software: Software V4.0x Concept / editorial office: Schaerer Ltd., P.O. Box, Allmendweg 8, CH-4528 Zuchwil © Copyright by: Schaerer Ltd., P.O. Box, Allmendweg 8, CH-4528 Zuchwil Before commissioning the coffee machine, be sure to read the chapter „Safety notes“ carefully.
www.schaerer.com Bean container (with lid) Insert for coffee powder (cleaning tablet) Cup plate Service door (2 parts) Control panel (see below) Brew unit Siena 1: Rotary dial Steam / hot water Grounds container Siena 1: Hot water / steam outlet Milk tube Foamer head (refer to page 43) Siena 2: Hot water outlet Siena 1: Beverage outlet Drip grid Water tank Drip tray Swivel The position differs between = Siena 1 and Siena 2.
www.schaerer.com Introduction Safety symbols Observe the safety instructions on page 40! Exercise extreme caution when these symbols appear! Caution! Risk of damage to machine! Caution! User at risk! Caution! Hot fluid! Caution! Hot steam! Caution! Hot surface! Caution! Risk of squeezing! Caution! Electrocution! Remark Information, tips Cross-reference Environmental aspects Disposal! The machine must be disposed of according to regulations! 12:00 Ready 01.01.
www.schaerer.com Table of contents Table of contents Safety symbols.................................................................................. 37 Introduction................................................. 37 Welcome............................................................................................ 37 Safety notes................................................ 39 General.............................................................................................. 39 Hygiene.........
www.schaerer.com Safety notes Safety notes General At Schaerer Ltd., the highest degree of safety is one of the most important product features. The effectiveness of the safety devices is guaranteed only if the following instructions are observed to prevent injuries and health hazards: • • • • Read the Operating instructions carefully before using the device. Do not touch any hot machine parts! Do not use the coffee machine if it is not working properly or is damaged.
www.schaerer.com Safety notes Disposal! For safety reasons, machines that have reached the end of their product life cycles must be rendered unusable. To do so, disconnect the power cord and sever the connector cable. Afterward, dispose of the device in accordance with regulations. Disposal! Old devices still contain valuable materials.
www.schaerer.com Safety notes Cleaning: • Thoroughly wash and disinfect hands before cleaning the machine! • Clean the machine daily after all beverages have been dispensed. • For daily and weekly cleaning, follow the instructions in the Operating instructions (Chapter „Cleaning“, page 57) and on the cleaning card.
www.schaerer.com Product description Product description Overview - machine (Refer to page 36) Overview - control panel (Refer to page 36) Detailed picture of the foamer head (Siena 2) 1. Foamer head 2. Corner piece 3 3. Foam nozzle 1 2 If no milk foam is dispensed, insert the supplied instrument (air valve pin) into the foam nozzle [ 3 ]. (Refer to the detailed picture on the left).
www.schaerer.com Product description Power supply Model Siena Siena 2 Fuse (installation site) Power rating 220-230V~ 50/60 Hz 200V~ 50/60 Hz 240V~ 50/60 Hz 100V~ 50/60 Hz 110V~ 50/60 Hz 120V~ 50/60 Hz 130V~ 50/60 Hz 2000-2200 W 10-16A 2200W 10-16A 1200W 16A The device must be electrically connected according to all valid regulations (VDE 0100) as well as national stipulations. The type of power cable must be at least H 05 VV-F.
www.schaerer.com Product description Installation plan for Siena 2 534 314 100 min.
www.schaerer.com Commissioning Commissioning Before using for the first time: Never operate the device without water. After longer periods of non-use (e.g. due to holiday), it is recommended for hygienic reasons that the device be rinsed by means of the hot water/steam injector and the cleaning program started before the device is used again. ► Place the package on the ground with the number facing up; carefully cut the adhesive tape open. ► Place the device on a stable, horizontal surface.
www.schaerer.com Operation Operation Introduction This chapter describes the basic functions of the coffee machine. Observe these instructions in order to ensure smooth and safe daily operation. Please observe the safety notes on page 40! Correct and optimal operation of the coffee machine is required and ensured through proper installation and programming by a qualified service technician. • Never reach under the beverage outlet or the hot water outlet while a product is being dispensed.
www.schaerer.com Operation Operating modes The Siena 1 / 2 has two (2) operating modes: << Stand by >> Ready The machine is switched off but still connected to the power supply. The following message appears on the display (shown left). The machine is ready to operate. The following message appears on the display (shown left). Preparing products If the „water low“ function indicator the tank.
www.schaerer.com Operation Preparing hot water (Siena 2) The temperature indicator lights up in green. ► Place a cup under the hot water outlet. ► Press the button. The dispensing procedure is stopped by pressing the button again. ► Remove the cup from under the outlet. Preparing steam (Siena 1) Not possible with the Siena 2! ► Place a cup under the hot water outlet. ► Turn the rotary dial (on the right-hand side) to the [ Steam ] position.
www.schaerer.com Operation Preparing milk foam (Siena 2) Milk foam can be dispensed and/or added at any time. ► Place a cup under the outlet. ► Press the button and keep it pressed. ► Press and hold the cappuccino/macchiato button to dispense milk foam. „Milk“ appears on the display. ► The dispensing procedure is stopped by releasing the cappuccino/macchiato button. ► Remove the cup from under the outlet.
www.schaerer.com Programming Programming Your coffee machine is pre-programmed at the factory. You also have the option, however, of adjusting the device to your individual tastes. You can program the following product-related elements (refer also to the programming overview): Water volume - coffee quantity - pre-brew function In addition, you can program various device functions individually.
www.schaerer.com Programming Overview: product programming (coffee, cappuccino) Accessing the programming level: Ready ► Press to access the programming level. Product, 2x, C Siena 1 + 2: Press button [ 1 ] or [ 2 ] (see page 51) + 0% ## ► Set the water volume (ml) using ► Confirm by pressing + 0% #.## s ON ► Set the coffee quantity (grinding time) using or . or . . ► Switch pre-brewing on or off using ►Confirm by pressing Ready . . ► Confirm by pressing Pre-brewing or or . .
www.schaerer.com Programming Overview: product programming (milk foam, hot water) Accessing the programming level: Ready ► Press to access the programming level. Product, 2x, C Siena 2: Product programming: milk foam ► Press button [ 4 ] + 0% #.## s ► Set the milk foam volume (sec.) using ► Confirm by pressing Ready or . . End of milk foam programming. Siena 2: Product programming: hot water ► Press + 0% #.## s ► Set the water volume (sec.
www.schaerer.com Programming Overview: programming common parameters Accessing the programming level: Bereit ► Press to access the programming level. Product, 2x, C Press the button ► Set the language using English or ► Confirm by pressing ► Set the brewing temperature using Temp. 86 °C ► Confirm by pressing Stand by . bestätigen. 1h . . ► Set the automatic switch-off time using ► Confirm by pressing +41326816200 or or . . ► Service telephone number. ► Confirm by pressing . Ex.
www.schaerer.com Programming Overview: programming fixed parameters Accessing the programming level: Ready ► Press to access the programming level.. Product, 2x, C Press the button Code #### ► Set each digit using or ► Confirm by pressing ► Set counter level to 0 using Counter status? ► Confirm by pressing . ► Confirm by pressing ON ON ► Grant authorisation to descaling using ON ON 16 ° - 20 ° dH or . ► Grant authorisation for product programming using or . or . .
www.schaerer.com Cleaning Cleaning his chapter describes the cleaning of the coffee machine. To achieve the best possible quality of the dispensed beverages, it is necessary to clean the machine properly and thoroughly on a daily and weekly basis. Please observe the safety notes on page 40! • • • • • • • • Never reach into the machine during the automatic cleaning cycle and never place your hands under the beverage outlets.
www.schaerer.com Cleaning Daily and weekly cleaning Carefully read the information given in the Operating instructions as it contains important information regarding safety,hygiene, use and maintenance of the machine.
www.schaerer.com Cleaning 2 Coffee system cleaning: (Siena 1 / Siena 2) 2a 3 2b ► Fill the water tank with fresh water. ► Empty the drip tray and place a container (Volume: ± 1.5 Litre) under the outlet. ► If „Tablet“ already appears on the display don‘t press the button! Otherwise press the button for 4 seconds, until following message displays: Tablet Milk system rinsing: (Siena 2) 3a ► Insert the cleaning tablet into the funnel. button.
www.schaerer.com Cleaning Descaling Carefully read the information given in the Operating instructions as it contains important information regarding safety, hygiene, use and maintenance of the machine.
www.schaerer.com Cleaning 7 When the descaling is finished, a prompt to carry out the daily cleaning appears automatically. ► Descaling process is finished. On the display appears: << Stand by >> ► Reinstall the outlet. Installing/detaching the foam head (Siena 2) 2 ► Press the front of the foam head [ 1 ]. ► Remove the foam head by pulling it downwards [ 2 ]. ► Remove the milk tube and tube connector. 1 ► Swing the foam chamber (with outlet pipe) away from the outlet beaker [ 3 ].
www.schaerer.com Troubleshooting Troubleshooting Before having the machine repaired, please check the following points: Malfunctions and possible causes Fault To ensure the best possible coffee quality, it is necessary to clean and decalcify the coffee machine regularly.
www.schaerer.com Troubleshooting Service and maintenance work Even if the coffee machine is cleaned and maintained in an ideal manner, it must be serviced (once a year). Having a qualified service technician inspect the coffee machine regularly extends its product life cycle. Service request The service request only appears if it has been programmed by one of our partners or a qualified service technician.
www.schaerer.com Options Options Coin tester The following accounting systems are available: • Tokens • Coins The coin tester option is possible in country-specific currencies. Please contact your customer service representative for further information. Coin tester - operation and maintenance Amount 1.20 The sum of money inserted into the machine appears in the display: No more than 10 units of the respective currency can be inserted. This sum can be changed by a qualified service technician.
www.schaerer.com Options Base with supports (Art. No.: 062489) A base is required for machines with a wastewater connection (supply and drainage pipes). This is only required if no holes are to be drilled into the counter! Fixed water supply FA fixed water supply is strongly recommended for coffee machines dispensing a large quantity of beverages.A fixed water supply is generally possible wherever supply pipes and drainage pipes are present.
www.schaerer.com Declaration of conformity Declaration of conformity Manufacturer’s address Manufacturer Documentation responsible Schaerer Ltd. P.O. Box Allmendweg 8 CH-4528 Zuchwil T +41 (0)32 681 62 00 F +41 (0)32 681 64 04 info@schaerer.com www.schaerer.com Schaerer Ltd. Hans-Ulrich Hostettler P.O.
www.schaerer.com Appendix Appendix Cleaning products Cleaning tablet (Art.-No.: 062867) Before using the cleaning tablet, please read the information on the tablet‘s packaging as well as the safety data sheet („HEALTH & SAFETY DATA SHEET“). If you do not have this safety data sheet, please request it from your sales centre. Purpose: For cleaning your coffee machine‘s coffee system on a daily basis. Shape and odour: Refer to the safety data sheet („HEALTH & SAFETY DATA SHEET“).
www.schaerer.com Declaration of conformity Emergency information: Please ask your sales centre or a cucological information centre) in your country. If your country does not have any such institution, dial the following telephone number in Switzerland in an emergency or for information: Swiss toxicological information center International calls +41 44 251 51 51 Calls from Switzerland 145 Internet www.toxi.ch First aid: Refer to the safety data sheet („HEALTH & SAFETY DATA SHEET“).
www.schaerer.com Declaration of conformity Overview of accessories Qty. Article Art.-No. 1 Operating instructions 062417 1 Quick reference card 062107 10 Cleaning tablets 062867 1 Measuring spoon 067111 1 Multi-tool adjusting knob 062985 1 Brush 062951 1 Brush set (5 pcs.
www.schaerer.com 68 / 68 Declaration of conformity Operating instructions / V07 / 06.
