User manual
59
www.schaerer.com
BASI 2 - EN
Version 04
08.2007
Cleaning
Descaling
1 2 3
4 5
6
ʇ Press the button to enter the
Stand-by mode.
ʇ Remove the outlet.
ʇ Remove the water tank.
ʇ Mix water and the descaling agent into
the water tank (Dosage see below).
Carefully read the information given in the user manual as it contains important information regarding safety, hygiene, use and
maintenance of the machine.
Never reach into the machine or under the beverage outlets during the descaling process! Never interrupt the descaling proc-
ess! Never use vinegar as the descaling agent!
0DFKLQHV FRQQHFWHG WR WKH PDLQV VXSSO\ PXVW EH GHVFDOHG E\ D TXDOLÀHG VHUYLFH WHFKQLFLDQ Descaling of the machine is
a must when the function indicator blinks! With Software Versions under V 2.10 the display messages „Attention hot“ and
„2 container“ will not appear! If the „water low“ function indicator blinks, top up with water and re-insert the tank (The descal-
ing process will start automatically).
ʇ Re-place the water tank.
Descaler + Water
(1 x 750 ml) (2 x 750 ml)
Dosierung:
Siena 2:
ʇ Place a container under the outlet
(Volume: ± 2.0 Litre).
Siena 1:
ʇ Turn the rotary knob (on the right side)
to the [ Steam ] position!
ʇ Place a container under the hot water
outlet (Volume: ± 2.0 Litre).
ʇ Press the button (± 5 sec.).
On the display appears:
Ex. Software:
V 2.10
V 3.03
Descaling?
ʇ Press the button.
ʇ Press the button.
On the display appears:
Only appears if the steam gener-
ator temperature is over 90 °C!
Descaling 0 %
Descaling is running!
(duration: ± 40 minutes)
Caution HOT!
Wait until the display is showing:
ʇ Press the button.
If this message apears, always
put a 2
nd
container under the hot
water outlet.
Ex. software:
V 2.10
V 3.03
2nd container
Wait until the display is showing:
ʇ Rinse the water tank with water and re-
ÀOOLWZLWKIUHVKZDWHU/LWUH
Fresh water
ʇ 5HSODFHWKHZDWHUWDQN
ʇ 3ODFHDFRQWDLQHUXQGHUWKHRXWOHW9RO-
ume: ± 2.0 Litre).
ʇ 3UHVVWKH
button.
Rinsing is running!
(duration: ± 8 minutes)