Operation Manual

BASCV_EN
V03 | 07.2011
69
www.schaerer.comTroubleshooting
Pump runs permanently,
water in the grounds con-
tainer.
PC board defective.
Electrical problem between the pump and
the PCB.
Switch the machine off and back on.
Disconnect the machine from the mains pow-
er supply and reconnect it.
If not rectified, contact your service partner.
Choco/topping container
cannot be inserted.
Position of the dosing screw is wrong Manually turn the dosing screw drive slightly
clockwise.
Fault description Cause and effect What to do