Operation Manual

BASCV_EN
V03 | 07.2011
61
www.schaerer.comProgramming
The menu contains the following subitems:
• Warm rinse field
• Barista field
• 2nd level
• ON/OFF button ( button)
• Menu field
Display / display text Parameter description Setting
range
Notes
Warm rinse field
Main window with warm rinse field
activated.
By means of this parameter the warm rinse field
can be switched on and off in the main window.
► Touch the [Warm rinse] field.
 The setting switches between "active"
and "inactive" each time the field is
pressed.
See also "Operation" - "Main touch screen win-
dow" for a detailed description.
active / inacti-
ve
For self-service mode it is
recommended that this
function is deactivated.
Otherwise the operator
could trigger a warm rinse
by mistake.
Barista field
Main window with Barista field acti-
vated.
By means of this parameter the warm rinse field
can be switched on and off in the main window.
► Touch the [Barista] field.
 The setting switches between "active"
and "inactive" each time the field is
pressed.
See also "Operation" - "Main touch screen win-
dow" for a detailed description.
active / inacti-
ve
For self-service mode it is
recommended that this
function is deactivated.
The operator does not
open up the function, if it is
used only once.
2nd level
Main window with 2nd level activat-
ed.
Main window with 2nd level deacti-
vated.
By means of this parameter the 2nd level can be
switched on and off in the main window.
► Press field [2nd level].
 The setting switches between "active"
and "inactive" each time the field is
pressed.
See also "Operation" - "Main touch screen win-
dow" for a detailed description.
active / inacti-
ve
–
ON/OFF button
Input window PIN with the variant
"via PIN" activated.
The switching on and off of the machine can be
controlled by means of this parameter. For direct
switching on and off the machine can be swit-
ched on and off as usual. With the function "via
PIN" the machine can be switched on and off
only with input of the PIN.
► Touch the [ON/OFF button] field.
 Each time the field is pressed the setting
changes between "direct" and "via PIN".
The "Cleaning" level PIN is polled.
See "Programming" - "Menu, PIN access con-
trol".
direct / via
PIN
For self-service mode it is
recommended that the
function "via PIN" is deac-
tivated. Switching off by
mistake is therefore exclu-
ded.