Operation Manual

www.schaerer.com Operation
BASCV_EN
V03 | 07.2011
30
Option 3: Start/stop
► Press the [ Milk foam ] button.
 The set quantity is dispensed.
► If desired, end the dispensing process by pressing the beverage button again.
Steam
► Place a cup under the steam wand.
To dispense steam, three different dosing variants are available:
CAUTION!
Hot steam!
Option 1: Dosed
► - Press the steam button.
 The set quantity is dispensed.
 Dispensing cannot be interrupted.
Option 2: Freeflow
► - Press and hold the steam button.
 Dispensing continues as long as the button is kept pressed.
Option 3: Start/stop
► - Press the steam button.
 The set quantity is dispensed.
► If desired, end the dispensing process by pressing the beverage button again.
Dispensing options
Double beverage
The "Two beverages" dispensing option can be used to dispense two beverages at the same
time. The following beverages can be programmed:
• 2 cappuccinos
• 2 café crèmes
• 2 mugs of café crème
• 2 espressos
• 2 mugs of milk coffee
► Place two cups under the beverage outlet.
► Press the desired beverage button.
 The beverage button flashes while the machine is dispensing the beverage.
 The beverage name and the dispensing progress appear on the display.
Emptying
Grounds container
The cakes of coffee grounds ejected out of the brewing unit are collected in the grounds con-
tainer. This holds the coffee grounds from approx.?40 brewings.
The dosing variant can only be set by the service technician.
The dosing variant can only be set by the service technician.
See also "Main window touch screen" and/or "Programming" - "Settings" - "Recipes and bev-
erage buttons" for assignment of the beverage buttons and setting the dosage.