Operation Manual

www.schaerer.com Operation
BASCV_EN
V03 | 07.2011
28
► Place a cup under the beverage outlet.
► Grasp the beverage outlet from the front and slide it into the correct position (see figure).
► Remove the cup after the beverage has been dispensed.
Coffee beverages
CAUTION!
Hot fluid!
► Place a cup under the beverage outlet.
► Slide the beverage outlet to the desired position.
► Press the required beverage button.
 The beverage button flashes while the machine is dispensing the beverage.
 The beverage name and the dispensing progress are shown on the display.
 Premature stopping of the dispensing process is not possible.
► Remove the cup after the beverage has been dispensed.
Beverages with ground coffee
CAUTION!
Risk of machine
damage!
Incorrect use may damage the machine.
Never put anything into the inlet other than ground coffee or cleaning tablets.
► Open the manual inlet.
 The display messages "Insert ground coffee" and "Close manual inlet" appear.
► Fill ground coffee (max. 15 g).
► Close the manual inlet lid.
 The display request "Select coffee beverage" appears.
► Press the required beverage button.
 The beverage button flashes while the machine is dispensing the beverage.
 The beverage name and the dispensing progress appear on the display.
 Premature stopping of the dispensing process is not possible.
► Remove the cup after the beverage has been dispensed.
Hot water
► Place a cup under the hot water outlet.
Three different dosing variants are available for dispensing hot water:
Lit beverage buttons signal that the respective beverage is ready for dispensing.
The inlet for ground coffee is located between the bean hoppers.
If the manual slot remains open for a lengthy period, the message "Manual slot time limit ex-
ceeded" and the procedure is aborted.