Operation Manual

www.schaerer.com Operation
BASCV_EN
V03 | 07.2011
24
Machine powder
CAUTION!
User at risk!
Danger of injury on the rotating dosing augers!
Never reach into the powder container while the device is switched on.
CAUTION!
Risk of machine
damage!
Danger of blockage through filling with unallowed powder!
Never fill anything other than powder for automatic operation into the powder contain-
er.
Option 1: Choco
► Pour in the desired choco powder.
Option 2: Topping
► Pour in the desired milk powder.
Option 3: Choco topping
The powder container for chocolate topping is divided in the middle and has two compartments
for one type of milk powder and one type of chocolate powder.
► Fill compartment 1 with the desired milk powder.
► Fill compartment 2 with the desired chocolate powder.
Option 4: Twin Topping
The powder container for Twin Topping is divided in the middle and has two compartments for
two different types of milk powder.
► Pour the desired milk powders into compartments 1 and 2.
Option 5: Twin Choco
The powder container for Twin Choco is divided in the middle and has two compartments for
two different types of choco powder.
► Pour the desired choco powder into compartments 1 and 2.
The milk nozzles included in the scope of supply (1 mm - 1.7 mm) have an influence on the
milk temperature. Milk foam that is too cold requires a smaller nozzle diameter. Milk foam that
is too hot requires a larger nozzle diameter.
The feed screws for chocolate powder and milk powder are of different sizes. Label the two
container compartments from the outset so that no mixups can occur when the powder is
topped up.