Operating instructions

www.schaerer.com Product description
BASCP_EN
V02 | 09.2011
10
Serial plate
The serial plate is located on the rear side of the service door.
► In the event of a fault of warranty case, please quote the data on the serial plate.
Declaration of conformity
Manufacturer's address
Applied standards
The aforementioned manufacturer declares herewith that this machine complies with all rele-
vant stipulations of the specified directives. In case of any modifications of the units that have
not been approved by Schaerer, this declaration is rendered invalid. The following harmonised
standards have been applied. A quality management system certified by Bureau Veritas, in ac-
cordance with SN EN ISO 9001: 2008, has been used to ensure the proper adherence to the
requirements.
Manufacturer Responsible for documentation
Schaerer AG
P.O.Box
Allmendweg 8
CH-4528 Zuchwil, Switzerland
Tel. [phone]
F [phone]
[e-mail]
www.schaerer.com
Schaerer AG
Hans-Ulrich Hostettler
P.O.Box
Allmendweg 8
CH-4528 Zuchwil, Switzerland
CE conformity
Machinery Directive 2006/42/EC EMC Directive 2004/108/EC
• EN 60335-1:2002 +A1 +A11 +A12 +A13
+A14 +A2
• EN 60335-2-75:2004 +A1 +A11 +A12
+A2
• EN 62233:2008-04
• EN 55014-1:2006 +A1
• EN 55014-2:1997 +A1 +A2
• EN 61000-3-2:2006 +A1 +A2
• EN 61000-3-3:2008
• EN 61000-6-2:2005
• EN 61000-6-4:2007 +A1
International (CB)
Safety EMC
• IEC 60335-1 Ed4.2:2006
• IEC 60335-2-14 Ed 5.1:2008
• IEC 60335-2-15 Ed 5.2:2008
• IEC 60335-2-75 Ed 2.2:2009
• IEC 62233 Ed1:2005
• CISPR 14-1 Ed 5.1: 2009
• CISPR 14-2 Ed 1.2: 2008
• IEC 61000-3-2 Ed 3.2: 2009
• IEC 61000-3-2 Ed2.1:2001
• IEC 61000-3-3:2008
• IEC 61000-6-2:2005
• IEC 61000-6-4:2006 +A1