Operation Manual

www.schaerer.com Operation
BASCJ_EN
V02 | 08.2012
22
Display message Cause What to do
Empty grounds container The grounds container is full. ► Remove and empty the grounds container.
 Dispensing of beverages is blocked
while the grounds container is not in
place.
► Place back the grounds container.
 "grounds. cont. empty?" appears on the
display.
► Confirm with the button.
beverage sel. locked
refill water tank
The drinking water tank is empty.
Beverages cannot be dispensed.
Option: With internal drinking water tank
► Open the stop valve of the water supply.
► Remove the drinking water tank and fill it
with fresh drinking water.
► Reinsert the drinking water tank.
Option: With mains water supply
► Open the stop valve of the water supply.
refill beans
confirm beverage
There are not enough beans in the grinder.
The grinder stops and beverage dispensing is
interrupted.
► Open the bean hopper lid (see figure).
► Pour in coffee beans (max. 250 g).
► Close the lid again.
► Press the beverage button again.
 Dispensing of the previously selected
beverage is completed.
insert coff. grounds
select beverage
The lid of the ground coffee inlet is open.
Beverages cannot be dispensed.
Option 1: Requesting a beverage with
ground coffee
► Fill ground coffee (max. 15 g).
► Close the inlet lid.
 The "select beverage" instruction ap-
pears.
► Press the desired beverage button.
 Dispensing begins.
Option 2: Stopping dispensing of the bever-
age
► Close the inlet lid.
► Stop dispensing with the button.
Change water filter The water filter in the drinking water tank must
be changed.
► Change the water filter.
See "Service and maintenance" - "Changing
the water filter".
tank lid missing? The lid of the drinking water tank is not in place.
Beverages cannot be dispensed.
► Correctly place the lid on the drinking water
tank.
► Slide the drinking water tank into the ma-
chine.
beverage sel. locked
lid open
The brewing unit lid is open or was not closed
correctly.
Beverages cannot be dispensed.
► Correctly close the brewing unit lid.
Clean display The operating panel is dirty.
The buttons no longer react.
► - Press the button for 5 sec.
 The machine switches off.
► Clean the display with a moist cloth.
► - Press the button.
 The machine switches back on.