Operation Manual

www.schaerer.com Operation
BASCJ_EN
V02 | 08.2012
16
Operation
Check before switching on
► Before switching on the coffee machine, check whether the following conditions are ful-
filled.
Conditions for switching on the coffee machine:
• The fresh water supply is open or the water tank is filled.
• The bean hopper is filled.
• The coffee grounds container is empty and inserted correctly.
• The coffee machine is correctly connected to the mains power supply.
Filling and connecting
Coffee beans
CAUTION!
User at risk!
Danger of injury from rotating grinding discs.
Never reach into the bean hopper while the coffee machine is switched on.
CAUTION!
Risk of machine
damage!
Filling foreign bodies into the hopper can lead to clogging or destruction of the grinder.
Never fill anything other than beans into the bean hopper.
► Open the bean hopper lid (see figure).
► Fill in beans (max. 250 g).
► Close the lid again.
Water
Option 1: Internal drinking water tank
► Remove the drinking water tank daily and rinse out thoroughly with fresh water.
► Fill the drinking water tank with fresh drinking water before using it.
► Reinsert the drinking water tank.
Option 2: Mains water supply
CAUTION!
Risk of machine
damage!
The machine can suffer damage, if the pump runs dry.
Before switching on the machine make sure that the main water valve is open.
► Open the stop valve on the main water valve.
For reasons relating to insurance law it is advisable that the main water valve is closed at the
end of the day.